C4 transmission crossmember for 73 Convertible

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ballaratcastle

Well-known member
Joined
May 29, 2018
Messages
161
Reaction score
0
Location
New Zealand
My Car
1973 Mustang Convertible. Just imported from the USA as an unfinished project.
[url=https://ibb.co/gXU4Qy][img]https://preview.ibb.co/f0tW5y/Mustang.jpg[/img][/url]
Hi guys. 

I have been trying to find out what the C4 transmission crossmember looks like for the 71-73s as the old one didn't come in the parts with my car when I imported it, and internet searches on the parts sites doesn't show a c4 crossmember for a 71-73 just one for a  66-70 like in this CJ pony parts listing link below.

 https://www.cjponyparts.com/transmission-crossmember-c4-3-speed-4-speed-1967-1970/p/TCU2/

However a couple of old threads 2015 came up on a google search about the same issue where a 3 arm crossmember was on a c4 and pushing it sideways but some members had posted photos of their old crossmembers they could send the thread poster and they looked identical to the one pictured on CJ's for the c4 for 66-70 models so am a bit confused. 

Thanks

 
Looks the same, but doesn't mean it's dimensionally the same. Here one that I personally took out of a 71 car with a C-4.

Mmm thanks. Does look identical that's why I can't understand why they have them new up to 70 models but not 71-73??

 
Here is a pic of my C 4 with the bracket installed.
Thanks. Did you buy the bracket new or just had the old one chromed? Would love to know where I can buy a new one. Cheers

Steve

 
I just read the fine print on the C4 transmission crossmember for the 66-70 models which looks similar to the 73 crossmembers photos posted, but it says that bracket will not fit a 351 or big block so now am even more confused at what I need to find for my 73 with a 351W and the C4.

 
Back
Top