Jump to content

1971-73 fold down seat


Recommended Posts

Stainless trim is very nice,no rust.300 plus shipping

 

Hi

 

Do you have the interior side panels for it?

 

Sorry no,sold those.

If you need a complete set, let me know as I have on in Ginger.

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

  • 6 months later...

 

Hi

 

Do you have the interior side panels for it?

 

Sorry no,sold those.

If you need a complete set, let me know

as I have on in Ginger.

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

Link to comment
Share on other sites

Stainless trim is very nice,no rust.300 plus shipping

 

Is this still available? And would I be getting everything to make it work in a factory solid rear seat? If not could we make it happen?

 

Sorry,long gone. I have the trap door and supports though.

Link to comment
Share on other sites

 

Sorry no,sold those.

If you need a complete set, let me know

as I have on in Ginger.

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

 

Study the conversion well my friend.  Not a trivial task to convert.

 

kcmash

Link to comment
Share on other sites

It is quite a task and I think there might be two different versions. The reinforcements behind the seat are totally different. You also will have to find a hens tooth space saver spare. There are several versions but this is what ours look like. The mount for the spare tire is different in fold down see pic. You store the cylinder under the tire with the spring loop. The lock is part of the protection package. Could not get on Mach 1 so I bought one at dealer and installed. A good space saver will be hundreds.

If you still think you want to go with it and nobody on the forum has the parts you can go to facebook and friend Scotty Strickland in Oxford, NC he has a Mustang junk yard. Shipping will be a bunch.

 

DSC-0951.jpg

 

 

100-2222.jpg

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

It is quite a task and I think there might be two different versions. The reinforcements behind the seat are totally different. You also will have to find a hens tooth space saver spare. There are several versions but this is what ours look like. The mount for the spare tire is different in fold down see pic. You store the cylinder under the tire with the spring loop. The lock is part of the protection package. Could not get on Mach 1 so I bought one at dealer and installed. A good space saver will be hundreds.

If you still think you want to go with it and nobody on the forum has the parts you can go to facebook and friend Scotty Strickland in Oxford, NC he has a Mustang junk yard. Shipping will be a bunch.

 

DSC-0951.jpg

 

 

100-2222.jpg

Carolina, do you have the space saver mounting bracket (as pictured) for sale?

Link to comment
Share on other sites

 

Sorry no,sold those.

If you need a complete set, let me know

as I have on in Ginger.

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

I should have everything you need, less the space saver bracket.   Let me get you some pictures of what I have so you can see it.

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

I do not. Scotty Strickland probably has one. I took pictures of them when there a couple years ago. He might have sold all of them. Someone had got the fold down parts but left the spare bracket.

You can get repo spring but I have not see a bracket.

Correct me if I am wrong. You got the space saver spare with the Magnum 500 option even in vert or coupe? Seems like I remember that from Ford Facts Book. That would be 71 - 72.

 

DSC-2165.jpg

 

DSC-2167.jpg

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

If you need a complete set, let me know

as I have on in Ginger.

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

I should have everything you need, less the space saver bracket.   Let me get you some pictures of what I have so you can see it.

That would be great, and a great lead to a stang salvage yard, my B pillar is shot I mean shot but I would love to convert my Mach to a fold down my birthday is in the vin so it’s like having your birthday on a $2 bill for an old timer lol

Link to comment
Share on other sites

Link to comment
Share on other sites

If you need a complete set, let me know

as I have on in Ginger.

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

I should have everything you need, less the space saver bracket.   Let me get you some pictures of what I have so you can see it.

 

Here is what I have - All four side panels (but front panels have speaker holes cut in them), Fold down seat assembly, Trap door, Attaching brackets and support Braces/brackets are still in a car and would need to be cut out once it warms up enough!).

IMG_7108.jpg.72dc85eb38be1a62276c90cdd1fdb29a.jpg

IMG_7109.jpg.177bd28e7f87532c968aa1b8b03be6f0.jpg

IMG_7110.jpg.5d123bc6774ace18b72a0fb2f09d72b6.jpg

IMG_7112.jpg.2b56d15b5e6b33726ec3eb75f076d36e.jpg

IMG_7113.jpg.721cc0ec49891f4d00bedc2f08ce8854.jpg

IMG_7145.jpg.29c2ba3606d7827a1227b245ba6124e2.jpg

IMG_7148.jpg.03f395a9d83d7052bfae3cb81df3b0fe.jpg

IMG_7149.jpg.394a101b4208c2fc34e0da0e6a314137.jpg

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

Motor city you still have a rear seat fold down? I want to convert my non fold down to a fold down.

I should have everything you need, less the space saver bracket.   Let me get you some pictures of what I have so you can see it.

 

Here is what I have - All four side panels (but front panels have speaker holes cut in them), Fold down seat assembly, Trap door, Attaching brackets and support Braces/brackets are still in a car and would need to be cut out once it warms up enough!).

 

Well now that’s the equipment I need for a fold down. I would like to acquire these pieces from you. I’d like all of it minus the rear deck lid inner panel. Are you cutting the car to pieces?, I mentioned I need a LH B-pillar, and transmission member plus  1 more piece if possible from you.

Link to comment
Share on other sites

Stainless trim is very nice,no rust.300 plus shipping

 

Is this still available? And would I be getting everything to make it work in a factory solid rear seat? If not could we make it happen?

 

Sorry,long gone. I have the trap door and supports though.

 

I believe I found a bundle with motor city so I’ll hopefully pay shipping once. Lol with respect

Link to comment
Share on other sites

I should have everything you need, less the space saver bracket.   Let me get you some pictures of what I have so you can see it.

 

Here is what I have - All four side panels (but front panels have speaker holes cut in them), Fold down seat assembly, Trap door, Attaching brackets and support Braces/brackets are still in a car and would need to be cut out once it warms up enough!).

 

Well now that’s the equipment I need for a fold down. I would like to acquire these pieces from you. I’d like all of it minus the rear deck lid inner panel. Are you cutting the car to pieces?, I mentioned I need a LH B-pillar, and transmission member plus  1 more piece if possible from you

 Let's make sure I understand what you need and are looking for.   You do not want the metal in the rear (see picture) correct?   For transmission cross member, do you need the bolt on trans crossmember piece or are you looking for the metal brace that goes from one side to the other?   For the B Pillar, are you talking about the door jamb area?   I don't really have the means to cut metal out.

IMG_7145.jpg.a92d274a301ea1a6a2d7e7918e6e564a.jpg

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

 

Here is what I have - All four side panels (but front panels have speaker holes cut in them), Fold down seat assembly, Trap door, Attaching brackets and support Braces/brackets are still in a car and would need to be cut out once it warms up enough!).

 

Well now that’s the equipment I need for a fold down. I would like to acquire these pieces from you. I’d like all of it minus the rear deck lid inner panel. Are you cutting the car to pieces?, I mentioned I need a LH B-pillar, and transmission member plus  1 more piece if possible from you

 Let's make sure I understand what you need and are looking for.   You do not want the metal in the rear (see picture) correct?   For transmission cross member, do you need the bolt on trans crossmember piece or are you looking for the metal brace that goes from one side to the other?   For the B Pillar, are you talking about the door jamb area?   I don't really have the means to cut metal out.

 My photo is what I don’t need and I shouldn’t of asked you for more than you offered, but I did mean the “metal brace that goes from one side to the other” I fortunately found a B pillar.

Link to comment
Share on other sites

 

Well now that’s the equipment I need for a fold down. I would like to acquire these pieces from you. I’d like all of it minus the rear deck lid inner panel. Are you cutting the car to pieces?, I mentioned I need a LH B-pillar, and transmission member plus  1 more piece if possible from you

 Let's make sure I understand what you need and are looking for.   You do not want the metal in the rear (see picture) correct?   For transmission cross member, do you need the bolt on trans crossmember piece or are you looking for the metal brace that goes from one side to the other?   For the B Pillar, are you talking about the door jamb area?   I don't really have the means to cut metal out.

 My photo is what I don’t need and I shouldn’t of asked you for more than you offered, but I did mean the “metal brace that goes from one side to the other” I fortunately found a B pillar.

 

No issue on the extra items, I have cut out metal before, I am just really slow at it!!  I should probably get the right tools.   So you just don't need the upper part of the package tray area, but need everything else.

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Summer Raffle 2021!

    Get your Summer 2021 Raffle Entries NOW!!

    Click the button below to go to our forum donation page and select your choice of 1 entry for $5 or 5 entries for $20 from the donation dropdown menu!

    Buy Now!
×
×
  • Create New...