Jump to content

All you '73 owners who have stock aluminum slot wheels


Recommended Posts

All you '73 owners who have stock aluminum slot wheels and always wanted larger tires while keeping the stock look...

 

I recently picked up a '70 Mach 1 that had a set of very tarnished vintage Ansen Sprint aluminum slot wheels. They are a staggered setup, with 14" x 9" in back and 14" x 7" or 7 1/2" up front A nice set of vintage Ansen Sprint are getting good money these days from those who want the vintage look. After staring at them on the car thinking about what to do with them., it dawned on me... they look a lot like my 73 Ford Aluminum slot wheels only bigger.

 

I know US Mags and American Racing (who now makes new Ansen Sprints) make new Aluminum Slots but they look different than our stock 73 Aluminum slot wheels.

 

So I decide to clean up (a bit) one of the front Ansens and the lugs and see if the Mustang Aluminum slot center cap would fit the wheel. Well what do you know, they do fit. They wrap themselves perfectly right around the Ansen style lug nuts and lug nut washers. All I need to do is drill and tap the 3 or 5 screw holes that mount the cap to the wheel and maybe add the black stripe around the inner wheel lip. I could then have 225/60s up front and 235/60s in back while keeping the stock wheel appearance. Here is a pic of my stock 73 aluminum slot and the Ansen with the stock 73 aluminum center cap. All it needs is a little more polishing, the black accent stripe, and a nice wide white letter tire. What do you think?

 

20180727_175744_1.jpg

 

20180727_175755.jpg

The stock Ansen Center cap

20180727_180924_1.jpg

 

00_I0_I_j_YMHC0_UOn2_D_1200x900.jpg

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle

DSC_0266xsm.jpg

satellite.png Proud Space Junk Award Winner!

 

 

 

 

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites

They do look similar, Nice find.

Mike AKA Ole Pony & Rare Pony
Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

20180127_082009.jpg

 

 

 

 

 

Link to comment
Share on other sites

just need to paint the black ring.

73 ragtop, 1999 Mustang Bright Atlantic Blue Paint, Phoenix Engine 302-335HP,  Edelbrock Carb & Performer manifold; c4 with 2000 stall and shiftkit; 3:55 auburn limited slip differential, Hedman shorties; Car Chemistry Exhaust

 

Classic Air; Tilt Steering Wheel; 1999 Chrysler Sebring bucket Seats ; power windows;

Link to comment
Share on other sites

Weird I was coming here to ask a similar question and this is the top thread. Congrats on the car btw, I love the 70.  I think you answered my question but just to clarify.  On my local letgo someone is selling the slot wheels but I do not see the screw holes for the center caps. The wheels are listed as 14 x 6 with 4 1/2" bolt pattern. No screw holes mean these are not ford oem correct?  Which is fine since it sounds like I could add that but just so I know.

1973 Mach1 351C Ram Air

Link to comment
Share on other sites

Weird I was coming here to ask a similar question and this is the top thread. Congrats on the car btw, I love the 70.  I think you answered my question but just to clarify.  On my local letgo someone is selling the slot wheels but I do not see the screw holes for the center caps. The wheels are listed as 14 x 6 with 4 1/2" bolt pattern. No screw holes mean these are not ford oem correct?  Which is fine since it sounds like I could add that but just so I know.

 

The screw holes I am referring to are specifically for mounting the 73 aluminum slot center caps as shown in the pics. The original 73 Ford Aluminum slot wheels are 14 x 6 with a 5 x 4.5" bolt pattern and have the threaded center cap holes and the black accent stripe on the inner lip. I am not aware of any aftermarket wheels with the threaded center cap holes and the black accent stripe.

 

Are you looking for an original set of 73 aluminum wheels or aftermarket look-alikes?

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle

DSC_0266xsm.jpg

satellite.png Proud Space Junk Award Winner!

 

 

 

 

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites

I ran across them just browsing the app. He has $100 on them and for that price I'm interested. I like the look of those wheels. The picture he posted is not great but maybe the holes are there. I do see the black stripe. Unless it's painted like you mentioned doing to yours. I'm looking at them tomorrow after work

 

Sent from my SM-N950U using Tapatalk

1973 Mach1 351C Ram Air

Link to comment
Share on other sites

The center cap holes is what I was wondering, if they could be added. I was going to ask that question and saw where you said they could be. I don't have a cap to take but for 100 if they look nice I'll probably take them anyway.

 

Sent from my SM-N950U using Tapatalk

1973 Mach1 351C Ram Air

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...