Robnbama
Well-known member
- Joined
- May 8, 2012
- Messages
- 57
- Reaction score
- 0
- Location
- Attalla, Alabama
- My Car
- 1973 Ford Mustang Mach one
Hey everybody. I’m gettin started back on my ‘73 Mach One after years of it just sitting. I had to many projects going on. I’m at the point where I’ll be installing a HEI distributor and a fender apron mounted starter solenoid. The new HEI has a yellow, red and black wiring coming from the bottom. The starter solenoid has two larger nuts for the battery and starter wire and two other smaller nuts. One has an “I”and the other has an “s”. There is a original wiring harness goes along the front crossmember over towards the battery and has the following color coded wires. I just needed some input on where these wires would go. I’m pretty sure I have a one wire alternator with a built-in voltage regulator.
Big solid yellow wire
Light green red stripe
Red with green stripe
Red with light blue stripe
White with black stripe
After looking over the wiring diagram and a picture of the distributor I’m still lost. Is there anybody that could look on their wiring harness and see where the wires go? I know some goes to the solenoid some goes to the distributor and some goes to the alternator but I’m just not sure and I don’t want to fry my system.
Last edited by a moderator: