E7TE 302 Heads

piper62j · Aug 16, 2018

I came across a set of E7TE 302 heads that had a valve job done and appear to be in mint condition. Question for you guys. Will they bolt on to a 1968 stock 302? These heads have the factory fulcrum rockers & studs etc.

Let me know your thoughts and suggestions..

Thanks

mjlan · Aug 16, 2018

The Ford small block head bolt pattern never changed so most heads interchange.

How do the combustion chamber sizes compare as this would control your compression ratio.

It would also be necessary to double check your push rod lengths too.

I am probably forgetting something important, hopefully others will

Chime in.

Don C · Aug 16, 2018

They should fit, but you will have to check the pushrods, I think the length may be different.

Performance-wise they'll be about the same as stock '68 heads.

If you're looking for a performance upgrade look for GT-40 or 40P heads.

Edit: the one advantage of the E7 heads is hardened valve seats for unleaded gas.

piper62j · Aug 17, 2018

Sweet!!!!... Thank guys..

E7TE 302 Heads

Help Support 7173Mustangs.com:

piper62j

Well-known member

mjlan

Well-known member

Don C

Fords Forever

piper62j

Well-known member

Similar threads

Latest posts

E7TE 302 Heads

Help Support 7173Mustangs.com:

piper62j

Well-known member

mjlan

Well-known member

Don C

Fords Forever

piper62j

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!