Jump to content

New Member


ZIPNZ
 Share

Recommended Posts

Hi all,

 

I'm new to the forum, looks like a great community in here! I just purchased a somewhat restored '73 Mach 1 351c 2v (now has a Holley 4160 on stock 4v manifold and 4v open chamber heads) Ram Air, A/C, PB, PS, FMX, "Duraspark" single vacuum adv distributor, Red/Ginger std interior. Solid ride that spent it's entire life in SoCal and Vegas. Glad to be here! ::thumb::

 

I have a dilemma. Its seems that with some aspects of this car that instead of a true mechanic doing the work, a "parts installer" may have been under the hood at times instead. Problem being, that the vacuum system appears to be all wrong from what I can tell by doing some searches on this site. Therein lies my problem: I can't decipher exactly how the vacuum lines should be routed. For starters, the brake booster line is connected to the back of the carb base. The ram air is connected to the 3 prong vac tree on the back of the manifold, the distributor advance is connected to the front of the carb base plate, the PCV on driver's side valve cover is connected to the larger port on the front of the carb base plate, etc..

 

For starters, can someone tell me where (how) the vacuum lines are routed (from left to right) from the vacuum tree on the firewall?

 

Many thanks y'all!

WSQZ8221-1.jpg

Link to comment
Share on other sites

Hello and Welcome to the site. Looks like a nice car.

As far as the vacum lines you mentioned, they all sound like they are correct to me. Not sure what your exact set up is without some pics, but it sounds ok. Need a lot more info. What is giving you a problem? If it’s not running right could be a vacuum leak of some kind but need to know if it’s a stock set up or if you have a different carb and intake.

Anyway great looking ride and hope you have good luck with it!

John - 72 Q Code

Link to comment
Share on other sites

Welcome,

 

Great looking car. Some pics of your engine showing the lines would be helpful. Also, you did not mention but what exhaust manifolds/headers do you have? The 351-2V manifolds would not fit the 4V heads.

Jeff

1972 Q Code Convertible

 

Link to comment
Share on other sites

Welcome,

 

Great looking car. Some pics of your engine showing the lines would be helpful. Also, you did not mention but what exhaust manifolds/headers do you have? The 351-2V manifolds would not fit the 4V heads.

 

Hi, thanks for the replies! Here's the info that I can recall (I'm currently at work)

 

1. I have the stock 351c 4v exhaust manifolds on the car

2. The vacuum line for the brake booster is connected to the back of the carb (I think that it supposed to be connected to the vac tree on the back of the manifold)

3. The PCV hose is connected to the front of the carb (I think it's supposed to connect to the back of the carb base)

4. I think the single vac advance line from the distributor is connected (correctly) to the front of the carb

 

I'll have to look and see where the ram air vac hose is connected to as well as the two vac lines on the 4 port tree on the firewall (2 of the ports are capped)

Link to comment
Share on other sites

Welcome from CT!

 

Due to the modified nature of the manifold and carb, the stock vacuum diagrams will be of very little use. Everything you describe sounds about right to me as well.

 

If there's anything in particular that you feel is incorrect, please post it up!

 

 

Link to comment
Share on other sites

Welcome and YES it seems like you have a good handle on it (and yes the OTHER way isn't right)

 

I think if you take it one step at a time you will get correct.

1) get the booster signal done.

2) distributor (though right from carb base).....should be confirmed IF a correct vac advance. (Not a latter emissions retard)

 

The ram air is best to go by the diagrams and confirm both the dash pots and temp signals are working.

 

Mark

P.S. Nice when someone SHOWS they did their homework first !!

Link to comment
Share on other sites

Welcome and YES it seems like you have a good handle on it (and yes the OTHER way isn't right)

 

I think if you take it one step at a time you will get correct.

1) get the booster signal done.

2) distributor (though right from carb base).....should be confirmed IF a correct vac advance.  (Not a latter emissions retard)

 

The ram air is best to go by the diagrams and confirm both the dash pots and temp signals are working.

 

Mark

P.S. Nice when someone SHOWS they did their homework first !!

 

Thanks everyone! Looks like I have a bit of homework to do! Oh, and another thing: the PO installed the Holley 4160 (square bore) directly onto the stock 4v intake (spread bore) with no spacer. I plan on installing a 1/2" phenolic square bore spacer so:

1. the secondaries will fully open (the secondary holes on the spread bore are slightly offset)

IMG-2284-1.jpg

 

IMG-2283-1.jpg

 

 

2. No heat soak

3. better drivability

 

With the ram air, a 1" spacer won't work due to hood clearance

Link to comment
Share on other sites

Nice, complete and solid with enough minor work left to make it really yours. Best way to buy them!

 

Welcome from the northern Netherlands

73 modified Grande 351C. (Finally back on the road woohoo!) 

71 429CJ. ( In progress )

Link to comment
Share on other sites

Welcome from Iowa. Nice looking ride.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

 

- Jason

 

 

082-hot-rod-power-tour-2017-1970-1970s.jpg

 

Link to comment
Share on other sites

You can find a collection of vacuum diagrams here:

https://www.7173mustangs.com/thread-vacuum-hose-diagrams?pid=246021#pid246021

 

Here is some information on spread bore adapters

https://www.7173mustangs.com/thread-need-adapter-for-d1ze-9425-bb-intake-for-edlebrock-carb

 

It looks like you have a DuraSpark distributor, or do you just have a DuraSpark cap?

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to comment
Share on other sites

Welcome I like that red color I love all the grabber colors maybe some day ill have to paint a car with all the grabber colors not

THE WIND SHEILD COWBOY

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...