Jump to content

Removing tape from roof moldings


Recommended Posts

I'm in the process of putting my vehicle back together after paint and just doing the roof rail moldings/weatherstrips now

One of the worst jobs is removing old adhesive especially the double-sided foam tape so I Googled for some ideas and everything from WD40, wax & grease remover to eucalyptus oil was mentioned as the bees knees to remove it so I gave it a try and although it softened it a little it was still a slow and tedious process.

 

One bloke mentioned pouring boiling water over it so I gave that a try and it worked quite well however was quite messy as I needed to do this inside the shed.

 

Then a light bulb went off and I realized I had bought a clothes steamer like this one -

https://www.target.com.au/p/garment-steamer/60024565

I bought it ages ago to remove window tint film which by the way works perfectly well for this

 

So I got it out and gave it a try and boy did it make life easy, only needed to put the nozzle over for 10-20 seconds and by using a plastic trim remover tool that has the width of the tape or you could get away with a screwdriver it removed it in no time

Also used it to remove old glue and the caulking from the drip rails

You can even use it for removing stickers and old masking tape

Any garment steamer would do it and for 50 bucks well worth it and you might want to use it for your clothes too!

Oh and don't forget to wear gloves!

P1030149.thumb.jpg.f1cd8ba7a09312c4434f61e6119f5b70.jpg

P1030150.thumb.jpg.b6d011d767ec5561a71124245a40f8b0.jpg

  • Like 1
P1030238.jpg
Link to comment
Share on other sites

Great tip :goodpost: 

 

I'm about to do all of mine and put in the wind down rear quarter windows at the same time.

 

When it finally cools down enough to get in the shed without feeling like you swimming in your clothes.

 

Shane

Adelaide

 

73 Mach 1

Link to comment
Share on other sites

LOL, I bought a home steam cleaner to use on the detailing and cleaning of my 73 Mach 1 that has sat for 37 years. I picked one up at Goodwill for I think $15.00 use distilled water. This is not like you steam clean equipment with just a hand held wand and brush. I use to take cars I was working on to local filling station that had a big steam jenny and get them steam cleaned, engine and under the floors for $50.00. Made life so much easier and cleaner.

I would never go back with the foam tape on any part of the car. Was just a fast clean easy way for Ford to close them off and they leaked horribly.

Another great use for the steamer is when you are doing upholstery work. Will take the wrinkles out and tighten up the covers.

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...