gas tank installation

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 31, 2018
Messages
160
Reaction score
0
Location
KY
My Car
1973 Mach 1
work in progress
302 automatic
[url=https://ibb.co/cwk3bw3][img]https://i.ibb.co/DYzWGYW/IMG-3420.jpg[/img][/url]

[url=https://statewideinventory.org/used-cars]statewide auto sun valley[/url]
I'm getting ready to replace the gas tank.  Is there any rubber or other material used between top of tank and bottom of trunk pan?  

thanks

Bob

 
There was a pad of material on each side of the filler 'hump' ,but I don't think it is available. Either make your own or you can do what I did. Make some solid rubber pieces and glue them on. I use 1/16" rubber or perhaps a piece of inner tube.

The tank is the Spectra Premium F32A. Do NOT buy the Spectra Premium FG87A sending unit that is commonly wrongly sold for the Mustang. Buy the Dorman 692-232.

Here are pics of my tank and the orientation for the sender. (This is the original and was just put there to line up the new SS fuel lines before the Dorman was received.)





There are several recent post on this very subject if you care to search the forum.

Geoff.

 
There was a pad of material on each side of the filler 'hump' ,but I don't think it is available. Either make your own or you can do what I did. Make some solid rubber pieces and glue them on. I use 1/16" rubber or perhaps a piece of inner tube.

The tank is the Spectra Premium F32A. Do NOT buy the Spectra Premium FG87A sending unit that is commonly wrongly sold for the Mustang. Buy the Dorman 692-232.

Here are pics of my tank and the orientation for the sender. (This is the original and was just put there to line up the new SS fuel lines before the Dorman was received.)





There are several recent post on this very subject if you care to search the forum.

Geoff.
Thanks, the pics are great!

Bob

 
Back
Top