midplate

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

coilwire

Well-known member
7173 Mustang Supporter Member
Joined
Nov 5, 2010
Messages
707
Reaction score
1
Location
Rochelle,Il
My Car
1971 mach1
Hello everyone good to be back. Have a question about the midplate. I am changing over from a C6 to a C4. Have everything bolted up finally and

find out that the starter bolt hole on the plate do not line up with the trans. My question is there a difference in the midplate  between a C4 and a C6

Thanks 

Jim

 
There is, depends on if you're running a 157th bell/flexplate combo on the C-4, or a 164 tooth.

Small block C-6 were all 164 tooth. C-4 could be 157 or 164, depending upon original application, year etc.

 
Hello everyone good to be back. Have a question about the midplate. I am changing over from a C6 to a C4. Have everything bolted up finally and

find out that the starter bolt hole on the plate do not line up with the trans. My question is there a difference in the midplate  between a C4 and a C6

Thanks 

Jim
Click to expand...
Hemikiller the C6 was 164 tooth. The flexplate on there now is the 157 tooth. Thanks for the info.

Jim

 

Similar threads

N
Neutral Safety Switch
Replies
10
Views
1K
mrgmhale
mrgmhale
G
TKX/tremec install documentation?
Replies
5
Views
1K
giantpune
G
andy72
351C IDLE SPEED PROBLEM, FMX CLUNK?
2
Replies
32
Views
3K
AcesArneson
AcesArneson
H
Edelbrock 1406 Nightmare
Replies
11
Views
1K
Bobby
Bobby
D
Transmission Line Routing 351C C6 72 Mustang
Replies
2
Views
616
Darren 72
D

Latest posts

Back
Top