Jump to content

MSD Pro Billet Dist 8350


Recommended Posts

I'm getting ready to purchase an MSD Distributor Ready to Run Pro-Billet P/N 8350 for my 351C to replace my old Mallory Unilite. Would like to know if there is enough clearance under the hood of my Mach 1 for this dissy with wires installed. Don't really want to modify my hood. Height from base of Dissy dissy is 8.9375. any one out there have a similar install ? would appreciate any feedback to help on this problem.   

 

Thanks

 

 

 

8350-dim.jpg

 

8350-v1.jpg

 

 

Link to comment
Share on other sites

It will fit, but a factory air cleaner will not. Here is mine with the msd ready to run dizzy.

 

Hi Canted 393,

Thanks for your quick feedback. I've been looking at 13 inch air cleaner from NPD. Looking at yours is that a 13 inch diameter ?

Wish I could mount my coil like yours (Blaster 2) but I've still got A/c in the way....have to stick with horizontal mount on other side.

 

Thanks again,

Outrider4

Link to comment
Share on other sites

PO put MSD on and aftermarket air cleaner with a spacer ring around the top of the carb. and it still does not clear. It had Edelbrock Performer 2-V to 4-V set up. I need to find a smaller dia. air cleaner and stock does not fit either.

DSC-2423.jpg

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

I ran the msd 8577 pro billet with my stock air cleaner and it fit. But I did have a 1 inch spacer under the carb if I remember correctly.

 

https://www.summitracing.com/parts/msd-8577

 

 

 

C7433-FDC-0082-48-A4-B2-B2-E0-CFD5115426.jpg3-B851139-2-AC7-4-F8-A-98-B2-8-AE59-A4-BD2-C7.jpg

 

Thanks for the feedback. I can't run a stock air cleaner. I have throttle body fuel injection and it won't fit. There is also a fractional difference in the height of your  8577and the 8350. My plan is to run a 13 inch air cleaner. Thanks again for you feedback.

 

Outrider4

Link to comment
Share on other sites

PO put MSD on and aftermarket air cleaner with a spacer ring around the top of the carb. and it still does not clear. It had Edelbrock Performer 2-V to 4-V set up. I need to find a smaller dia. air cleaner and stock does not fit either.

DSC-2423.jpg

 

I have a FiTech throttle body FI and a 14 inch air cleaner on it now. The MSD 8350 with wires installed will interfere so a 13 inch air cleaner from NPD will fix it. I HOPE  Thank you for your feedback and good luck with yours.

 

Outrider4

Link to comment
Share on other sites

Yes its 13 inch, here is some more https://www.cjponyparts.com/mustang-air-cleaners-filters/c/60060020/

Link to comment
Share on other sites

Would 10" too small for the 351? Site site says at least 12/13 for good airflow. Or what size of spacer would be recommended to have a 14"?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...