Shock tower upper control arm not straight

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Robsweden

Well-known member
Joined
Nov 18, 2016
Messages
490
Reaction score
145
Location
Sweden
My Car
Mach 1 73 351c
Hi

I did a four Wheel aligment yesterday, with new suspension parts it came ok. But the shop manager noticed that my Wheel on the driver side is 5-7 mm forward than the one on the passenger side. He looked at the upper Control arm and it seems like its not straight into the Tower. I Went home and looked at it, it seems like the metal itself is a Little bit further in on the the hole I marked in the Picture.

Okay options remove the Control arm and try to heat or bring the metal back.

Put a shim on the other bolt in the Control arm so its straight. Can this be done ? should I shim out the passanger side to ?

Regards Rob



 
Back
Top