Looking for 351cleveland Edlebrock SVO intake

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikeyhunts

Well-known member
Joined
Mar 25, 2019
Messages
123
Reaction score
1
Location
Spring
My Car
68 pro street coupe- 351c4v
Thought I would post here since there are a lot of cleveland guys here.

I’m rebuilding my 351 4v, and I have one of the M-9424-A351 Roush/ Ford intakes that has been machined to work on my epoxied 4v heads. pic attached.

I don’t like that this particular model requires a turkey pan.

I’m looking for one of the EDLEBROCK “Torker” versions that has the solid floor pan base.

If you have one you would be willing to sell, please contact me.

Mike

832-833-0893

Sent from my iPhone using Tapatalk

 
Last edited by a moderator:
What about one of the Edelbrock Performer series intakes for the 351C?  They come in both 2V and 4V flavors, and share similar dimensions to the factory intake manifolds (i.e., won't mess with Ram Air component clearances).

 
That is certainly an option.

Was just hoping to find a hi port option similiar to what I already have except with the floor pan.

Here is what I have.

The PO riveted a sheet metal bottom on it.

735e52191e7f823ca22b7303416694db.jpg
16e870bc720ca82fee0c75cee8698031.jpg


Sent from my iPhone using Tapatalk

 
Awesome.

Trying to buy it.

Sent communication.

Sent from my iPhone using Tapatalk

 
Actually upon further inspection, that one is a bit different.

This in the one I’m looking for.

6071fa040a850cf39cb6962026d86aea.jpg


Sent from my iPhone using Tapatalk

 
Well I just found this one.....

7bdc3bc147171a205d41f429dfb1e6f5.jpg


Sent from my iPhone using Tapatalk

 
Unfortunately I do....

Previous owner did it.

Not much I can do about it now.

I am going to put a different scoop.

The current one is butt ugly.

393f13a30a16a169a5bcae368344b47c.jpg


Sent from my iPhone using Tapatalk

 
I think the one you are looking for is an SVO part (Cast by Edelbrock), PN M-9424-A331. Best bet is the 351C forum operated by Brent Lykins. Chuck

 
If you can, Send me some pics via text to that number posted above.

Thanks.

Mike

Sent from my iPhone using Tapatalk

 
C9,

Can you tell if that chrome one above that I posted is the intake your talking about?

It’s manually stamped a331, so I think it is.

Also looking forward to seeing this gray one that Bojo has.

Sent from my iPhone using Tapatalk

 
Last edited by a moderator:
Actually upon further inspection, that one is a bit different.

This in the one I’m looking for.

6071fa040a850cf39cb6962026d86aea.jpg


Sent from my iPhone using Tapatalk
I have one, it is powered coated gray.  I'll see if I can get a pic if you are interested.
Mine is actually a dark gray/black never installed.  It is an Edelebrock Torker for 351C 4v, a little dusty from being stored for a few years.  Attached a top and bottom pic.

20190510_113910.jpg

20190510_113928.jpg

 
Well the chrome one was for c3 heads, and won’t work for my epoxied 4v iron heads.

And I think the Torker that Bojo has is a regular Torker, not the hi port SVO one that I’m looking for.

Sent from my iPhone using Tapatalk

 
Yes Chuck, that’s the one I’m looking for?

Know where I can get one?

Sent from my iPhone using Tapatalk

 
Think I’ve secured on....

Thanks for the help....

d0ebdfe3b94bb0badbf21be47b969502.jpg


Sent from my iPhone using Tapatalk

 
Back
Top