71fordramair
Active member
- Joined
- Feb 13, 2012
- Messages
- 36
- Reaction score
- 7
- Location
- el cajon ca
- My Car
- 71 mach i 351c/4spd converted to 429. 71 mustang vert. 250 6,aod,3.0 ratio
while doing maintenance on front bearings, found that my outer race is spinning in the hub and has at least .005 slop. 70-73 large bearing hubs are not available. I was told 64-67 hubs can work by using their race and using the larger i.d. 71 bearing. can anyone confirm this? don't see need to go disc swap in my 6 cyl cruiser. the 10"x2 1/2" shoes stop straight after I ditched the self adjuster set up and went to the 64" manual adjust spring.