Jump to content

Grabber Lime Restoration Update - Headliner/Emergency Brake

Motorcity Mustang

Recommended Posts

Finally got the headliner in so I can begin putting the glass back in along with the weatherstrip moldings (then the interior).   Headliner was little bit of a pain as I got 3/4s of the way done and I put a small slice in the headliner with the razor blade (had to buy a new one and begin again).  Headliner is in, interior moldings are installed, but the C Pillars will come back off to put the sail panels and quarter panels in next. 


Emergency brake cable is now installed.  Had to cut the hole where it fits through the floor as the reproduction floor didn't have the hole and the bodyshop didn't catch that.  Luckily I have 25-30 parts cars to take make a template and cut in the new hole.   Everything is now attached inside and in through the frame rail. 


Also put new underlayment in for sound deadner and better fit for the carpeting.  Will have to use carpeting without the mass backing as this will take place of the that underneath. 


Hopefully will have the painted dash and rear shelf metal (under the window) back this weekend so I can install those next.  IMG-0351.jpg















  • Like 1

Thanks from MotorCity Mustang!


Link to comment
Share on other sites

Nice work!

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.


- Jason





Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...