Clevor build

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mjordan

Well-known member
Joined
Oct 31, 2017
Messages
70
Reaction score
10
Location
Wv
My Car
1973 sports roof
1995 gt
Up in the air on my engine combo. It’s a 408w/tremec combo currently sitting in the car for test fitting. Yes a Victor 5.8 efi intake will clear the ram air hood. All this was from a previous project that was sold to start this one. The more I look at it I’m just not really liking it. 

My dad had the short block built years back by Keith Craft to run 4v CJ heads making the Clevor setup that he ran in his drag car. Since then I had the pistons modified to accept steel darts, converted to a roller Comp cams xfi-236hr-14 that’s 236/[email protected] and .579 lift. Has a 114 lobe because it was originally going in my 95 gt for tuning reasons. 

Now that I see CVF makes accessory brackets for a Clevor, and since the 408 originally had 4v heads, and there are intake options, why not swap it back. I think headers may be the only other hurdle to overcome. 

 
Last edited by a moderator:
Back
Top