Anyone have a 4v CLEVELAND Parker Funnel Web sitting on the shelf?

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikeyhunts

Well-known member
Joined
Mar 25, 2019
Messages
123
Reaction score
1
Location
Spring
My Car
68 pro street coupe- 351c4v
Let me know.

Mike

832-833-0893

Sent from my iPhone using Tapatalk

 
I don't have but, what are you building that you want a funnel web intake? Just curious. Chuck

 
Good question.

This 381c is already built and up and running. It Dynoed at about 500hp.

All forged bottom, 4v heads, that are already epoxied to high port.

I have a SVO331 “Torker”style intake on it now and I REALLY real like it’s being choked back with not enough airflow. The Dyno said it was only flowing in the mid 600cfm.

I also have a SVORoush A351 Spider style intake, but I absolutely hate that it doesn’t have a built in valley plate.

I can’t really use my third option which is the Holley Strip Dominator.

While a lot of people swear by it, it’s not configured for the high port heads.

Just looking for another option, and the funnel web might be the ticket.

I’m certainly open to other ideas if someone has an idea on a good solution for an intake that will work with stuffed “high port” heads.

c9a873268bdb169b89fb8141c61e81cd.jpg


191deb5eae3ed1e9e51f507e0111eacf.jpg
e980cc8dc5ea6353a3888c0b232bf313.jpg


Sent from my iPhone using Tapatalk

 
Sweet setup! Where did you score that export brace from?

P.S. Strip dominator made the most power on the dyno with my 408c

 
I also have a SVORoush A351 Spider style intake, but I absolutely hate that it doesn’t have a built in valley plate.

-----

I’m certainly open to other ideas if someone has an idea on a good solution for an intake that will work with stuffed “high port” heads.
 "dragboss" on Youtube showed a machined aluminum valley plate he received from a vendor. Probably much less $$ than a Funnelweb. 


 
I would have your heads flow tested. I'm guessing that part of your 600 cfm restriction is due to the stuffed ports. The Torker intake should flow much more than that.

 
Sweet setup! Where did you score that export brace from?

P.S. Strip dominator made the most power on the dyno with my 408c

The esport brace is global west.

Very nice peace.

Highly recommend.

Sent from my iPhone using Tapatalk

 
Sweet setup! Where did you score that export brace from?

P.S. Strip dominator made the most power on the dyno with my 408c

The esport brace is global west.

Very nice peace.

Highly recommend.

Any mods needed to make it fit a 71-73?
 
Back
Top