Trunk seal like this?

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vinnie

Project manager "Project AmsterFoose"
7173 Mustang Supporter Member
Joined
Nov 7, 2013
Messages
1,589
Reaction score
274
Location
Amsterdam, The Netherlands
My Car
1973 Mustang Grande 351C 2V, built on the very last production day (July 6, 1973) for Grande's.
Hey folks,

Is this how the trunk seal is supposed to be?

e6bf871109805585eecc2d85e1a8c817.jpg


I bought a new one but it looks a tad small when placed in the original place...

Thoughts?

Cheers,

Vincent.

 
I had mine backwards for several years until I was at a car show with Chuck. There are so few of our cars at shows and it makes it hard to compare.

Sent from my iPhone using Tapatalk

 
Hey folks,

Is this how the trunk seal is supposed to be?

e6bf871109805585eecc2d85e1a8c817.jpg


I bought a new one but it looks a tad small when placed in the original place...

Thoughts?

Cheers,

Vincent.
+1 on Hemi.   See the attached below.  Pay attention where the adhesive goes and where to skip it.  I just replaced mine not that long ago.  You will more than likely have to adjust the trunk latch.  I had to elongate the adjustment holes in mine and it is still a bear to get it to latch.  Will take some time for the new seal to break in.





 
Back
Top