Jump to content

Remove heat/ac controls from dash


Recommended Posts

I did a mild search but could not find this.  I am taking apart my dash (trying anyway), have the center pod loose but do not know how to separate it from the heater/ac control plate that is holding it in.   Everything is loose screw wise, do I have to remove all the connections that go to the control panel back?

 

Still cannot get the dash off, have pulled but I guess not hard enough so far.

Link to comment
Share on other sites

You will have to disconnect everything from the back of the heater control, theres a plug on the light wires, two wires for the blower motor, the cable for the temp slider and the block of vacuum hoses should all unplug together, that heater control will not go thru the openening an has to come out front ways

Link to comment
Share on other sites

I did a mild search but could not find this.  I am taking apart my dash (trying anyway), have the center pod loose but do not know how to separate it from the heater/ac control plate that is holding it in.   Everything is loose screw wise, do I have to remove all the connections that go to the control panel back?

 

Still cannot get the dash off, have pulled but I guess not hard enough so far.

 

 

On my 71 after I remove the Radio bezel (4 phillips head screws), the heater control is held in with 4 1/4in hex headed screws. Remove them and disconnect the rear stuff and pull right out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...