- Joined
- Feb 20, 2020
- Messages
- 1,043
- Reaction score
- 292
- Location
- North Georgia
- My Car
- 1972 Mach 1 dark green
I had the windshield and rear glass replaced on my '72. The shop couild not get the rear trim to stay all the way down, said possible weather strip is too thick. pulling it up I see the top middle, on the driver side no clip from the middle to about 4" so I can see why the top middle is not held down. Top of the curves on both sides going down also hard to keep all the way down all the way, they seem to have a little give to them when I push down. I do not see any way to add clips now that the glass is in. Thought of using some sort of sort of adhesive or such to hold down the middle and maybe help the curve sides. Any ideas??