Jump to content

fastback vertical quarter window seals


Recommended Posts

  • 3 weeks later...

I have just put in the parts to make my 71 Mach to allow the rear windows actually operate and have recently had to do just this.  The quarter window with has three bolts, two on the top one at the the bottom that adjusts the forward/backward tilt.  You will see that the top ones have a horizontal slot and the bottom one has a vertical slot.  There is also an 'L' bracket (that the bottom bolt I just described attaches to) at the bottom that adjusts window camber.  It took a few times to get right but it was adjustable. 

Link to comment
Share on other sites

2 hours ago, obcom123 said:

I have just put in the parts to make my 71 Mach to allow the rear windows actually operate and have recently had to do just this.  The quarter window with has three bolts, two on the top one at the the bottom that adjusts the forward/backward tilt.  You will see that the top ones have a horizontal slot and the bottom one has a vertical slot.  There is also an 'L' bracket (that the bottom bolt I just described attaches to) at the bottom that adjusts window camber.  It took a few times to get right but it was adjustable. 

+1

If too far off then you may have to adjust the door window, but I will first try the method described by obcom123. It may take a few times, and then a couple more few times......

Edited by tony-muscle

20160929_171923_edit2_small.jpg

 

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump

Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...