Jump to content

"build sheet" from Ford


c9zx
 Share

Recommended Posts

http://www.shopfordgear.com/find.asp?session=9D9D83CDE8334B8A97A5B9D8C603B108&search%5Ftype=by%5Fdept&dept%5Fid=16&d=16&c=48652YHNOREJJK4&s= These used to be free but now Ford charges. They are not really build sheets but it looks very similar to a Mart report and cost is about the same. Just thought someone may be interested.

 

Chuck

Link to comment
Share on other sites

Speaking of build sheets. I took mine out not to long ago to get Chuck some info. While I had it out I noticed that the ink that Ford printed in the boxes has started to fade.I ask Marti and they couldn't help me, does anyone know how to preserve these or reproduce them? I think if I ran it through a copier that the print would not show up.

16kuyc0.jpg
Link to comment
Share on other sites

http://www.shopfordgear.com/find.asp?session=9D9D83CDE8334B8A97A5B9D8C603B108&search%5Ftype=by%5Fdept&dept%5Fid=16&d=16&c=48652YHNOREJJK4&s= These used to be free but now Ford charges. They are not really build sheets but it looks very similar to a Mart report and cost is about the same. Just thought someone may be interested.

 

Chuck

 

Good find, I was not aware of these. I wonder if Marti will be protesting.

Mike AKA Ole Pony & Rare Pony
Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

20180127_082009.jpg

 

 

 

 

 

Link to comment
Share on other sites

This is a History 999 Report that you can (or used to) get directly from Ford. Try calling them first at 1 800 392 3673 and ask for one with your VIN. I got both mine a few years ago free. I think the Fordgear site might be a third party who will can Ford themselves with your VIN and charge you.

FE177109-A1-C8-4-A6-C-9224-AACCFD66-C3-C9.png

 

Rick Bombard

1971 Grabber Green Mach 1 351C 4V

2013 Race Red California Special Convertible

1973 Medium Copper Metallic Convertible 302 4V     SOLD

1953 F-100 SOLD

Link to comment
Share on other sites

Speaking of build sheets. I took mine out not to long ago to get Chuck some info. While I had it out I noticed that the ink that Ford printed in the boxes has started to fade.I ask Marti and they couldn't help me, does anyone know how to preserve these or reproduce them? I think if I ran it through a copier that the print would not show up.

 

I scan all my documents and store the originals. Scan them as a full color document mode and save at the highest bit rate as is practical. You can also take a photo of it, and just manipulate it and print.

 

mike

 

spacer.png

Link to comment
Share on other sites

I also obtained the 999 report from Ford several years ago for both the 72 and my 67. Their was no fee only the amount for postage. Not sure if Ford still does it for free. I will check my copies this evening as they listed the department within Ford that produced them. It is just another great piece of documentation to have along with a Marti Report and Eminger Invoice.

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...