Jump to content

Any pictures of 71’ 351C engine harness?

Recommended Posts

71’ 351C car.

I can’t figure out how the heck the factory engine harness lays.  

Looking at the 72 diagram it seems like it should follow the drivers side valve cover. 

The “gotcha” seems to be the oil pressure wire which has to go to the sender in the center rear of the valley.  The short white wire with red trace is that wire.  

It almost appears like the harness crossed the rear of the engine and went forward on the passenger side valve cover.

Any help is appreciated (but good help is really appreciated!)




Link to comment
Share on other sites

Here is my 351C 2v with A/C. The harness runs down the drivers side. I don't see the electric choke wire with the square plug on your harness or the plug for the carb curb idle solenoid. The last picture shows the single white female plug for the PRDL light (if I recall correctly) which runs down the firewall and down the trans tunnel.  I think your white male plug in your picture is incorrectly part of engine harness.






Edited by rackerm
  • Like 1

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle


satellite.png Proud Space Junk Award Winner!














Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...