Equalizer bar bracket (engine side)

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 17, 2020
Messages
293
Reaction score
370
Location
Homer, Alaska
My Car
1971 Mustang Mach 1
429CJ, 4 Speed, 3.25 Traction Lock N case, A/C, P/W, tilt, fold down seats, int. wipers, deluxe interior.
Digging through my large pile of boxes of parts from this project...I found my equalizer bar, rod, and springs..but unfortunately can not seem to find the fabled bracket for the engine side. 
 

am I doomed? Who’s got one? 

B95E9715-0C87-498F-A9D8-8065D64B9733.png

 
Update! I found mine finally! 
 

right after I ordered a repop from perogie enterprises. 
so heads up if you’re looking for one, they had one. 
300$

2FB3C647-F157-4CF7-99EC-C3047E5362F6.jpeg

 
Is that the one for the 429? Looks a lot like the 6cyl/302/351 unit.
That pic is directly off the 429 megasite and the one I posted is the original that I found thank goodness 

 
I need to make one of these but I need two dimensions:

1) how far the ball CL is from the face that sits on the bell housing, and

2) how thick is the bell housing at these two bosses.

I don't have an OE bell, I have a scattersheild which is thinner so I figured I would make one vs. cut up an original part.

Thanks!

 
Wow$300 for a repopulated.

I guess I need to sell my NOS unit!

kcmash

image.jpg

 
Back
Top