Jump to content

Speedo reading incorrect. How to find the correct speedo driven gear


Recommended Posts

Hi team

I have a 73 vert with a 351W and C4 transmission. 

Put the car together and discovered that the speedo is reading 75mph when I am doing 100km (62mph) using a gps speed app on my phone.

I discovered when adding an LSD to the 9 inch diff that the gearing wasnt the 2.79 as on the tag but 3.25 and my rims that came with the car are non standard 16 inch mercury grand marquis wheels. 

The tyres on them are 225/60/16s.

I have no idea which speedo driven gear is on the cable and am not sure which size I should get to bring the indicated speed down to reflect the real speed as my mileage is obviously going up quicker than necessary. 

Is there a formula from wheel size and diff ratio to get the correct speedo driven gear?

Cheers

Steve

Edited by Ballaratcastle
Link to post
Share on other sites

Additional information and a calculator here

 

  • Thanks 1

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to post
Share on other sites

Thanks guys

I am still trying to work things out without knowing what the actual drive gear teeth number is. 

The trans guy who rebuilt my C4 thought it was an 8 tooth from a guess but the links you have given me tend to say for gear ratios up to 3.5 they are 7 tooth gears. As mine is a 3.25 (links say 3.27??) (Crown wheel 39 teeth and Pinion 12)

I did count the speedo gear tooth which is an 18 so am trying to work backwards with the indicated speed of 75mph being 62mph actual.

The tyres are 26.6inch so 758 revolutions per mile. 

Link to post
Share on other sites

Unless you bought the car new and never changed anything on it you don't know what has been changed over the years. You know that it doesn't have the original rear end gearing nor the original engine, so likely the transmission has been changed at some point, too.

It is likely that you have 8 tooth drive gears, which means you'll probably need a 20 tooth driven gear. In any case, you need more teeth on the driven gear to slow down the revolutions of the input to the speedometer.

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...