Jump to content

Lots of factory parts for sale.


Recommended Posts

Hey guys, this post will need some polishing but I figured I'd at least get it started to gauge interest and help with pricing. I want to post this in other places but this is the only honest place I trust. If you guys aren't interested if you at least help with price setting ill post elsewhere also.

So most may know I'm in the middle of doing a whole Holley Sniper EFI, Aeromotive fuel tank and dakota digital dash.

I kept all the factory stuff that came off.

I figured I'd try to sell the original 4 speed toploader as a conversion kit. I have the trans, clutch, bell, hurst shifter zbar, flywheel and driveshaft. All items are in working order and have 36K original miles on it. 

I also have a factory cluster with Tach and a factory long console with clock.

I have the factory intake with carb but the carb needs a rebuild. I also have the factory dizzy. 

I rebuilt my engine so I have a lot of factory internals if anyone is looking for anything along with an additional factory crank that has already been machined. I just need to check what it was turned to.

I'm sure there is more im missing. I have a big box full of parts so ill dig.

I can provide pictures for whatever anyone wants. 

Thanks guys.

  • Like 1

www.puregemdetailing.com

Link to comment
Share on other sites

4 hours ago, 73' mach 1 said:

Factory center console with clock and factory boot. I never had the clock connected so I'm not sure if it works. All the screw holes a solid except for one that has a crack but not broken off.

 

 

 

How much for the center console? If someone wants the clock or boot, I don't need them.

Edited by tony-muscle

20160929_171923_edit2_small.jpg

 

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump

Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes

Link to comment
Share on other sites

55 minutes ago, tony-muscle said:

How much for the center console? If someone wants the clock or boot, I don't need them.

Thats the thing...I'm trying to research but I have no idea on the value of this old stuff. Im just wanting whatever fair market value is.

www.puregemdetailing.com

Link to comment
Share on other sites

Fair market value? Hmmm. Supply and demand would dictate, I would think. 
 

here is an aftermarket center console direct fit, not original:

https://www.cjponyparts.com/acp-center-console-assembly-black-1971-1973/p/CON79/

$630! so, you’d think that an original factory console would be worth more, right? 
 

I suggest putting it all for sale on eBay. Start high end: like $800 for the center console. Research each part by searching and seeing what it’s going for.  If it doesn’t sell right away, then lower price until it does, depending on how long you want to hold out for top dollar.

Link to comment
Share on other sites

41 minutes ago, AzStang71 said:

Fair market value? Hmmm. Supply and demand would dictate, I would think. 
 

here is an aftermarket center console direct fit, not original:

https://www.cjponyparts.com/acp-center-console-assembly-black-1971-1973/p/CON79/

$630! so, you’d think that an original factory console would be worth more, right? 
 

I suggest putting it all for sale on eBay. Start high end: like $800 for the center console. Research each part by searching and seeing what it’s going for.  If it doesn’t sell right away, then lower price until it does, depending on how long you want to hold out for top dollar.

Wow?!?

www.puregemdetailing.com

Link to comment
Share on other sites

34 minutes ago, 73' mach 1 said:

Wow?!?

On the other hand, if I was to choose between your factory original center console and the direct fit replacement, and they were the same price, I might pick the direct fit replacement, because it would look brand new. Used factory original vs replica, pros and cons to each. Trying to do a restoration project with factory original parts is cool and all, but exact replicas have that brand new look. I guess it just depends on the buyer. There might be some people that will pay extra for factory original, but you may have to wait a long time for that buyer to come along. On the other hand if you priced yours at half what the replica costs, that would make it sell fast.

Link to comment
Share on other sites

Ram air, center console, shifter, zbar, clutch pedal and steering wheel are gone.

 

Left to sell is 4 speed toploader with bell housing and clutch fork, center bezel with 3 gauges, Speedometer, Tach and fuel gauge.

www.puregemdetailing.com

Link to comment
Share on other sites

  • 1 month later...
On 1/1/2021 at 8:52 PM, 73' mach 1 said:

Ram air, center console, shifter, zbar, clutch pedal and steering wheel are gone.

 

Left to sell is 4 speed toploader with bell housing and clutch fork, center bezel with 3 gauges, Speedometer, Tach and fuel gauge.

Just for the sake of argument, how much for the center bezel and the tachometer?

Thanks,

Jake

Jake

Zelda_small.jpg.6c1a098be729b393fbabf9eb641aee82.jpg

Link to comment
Share on other sites

  • 1 month later...

Hi,

   Do you still have the instrument cluster printed circuit board? If so, how much are you asking for it?  Is it in excellent condition?  Some of my lights/horn/speedometer, etc are not working  on my 71 Mach 1. Thanks! Janis

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
On 1/1/2021 at 10:52 PM, 73' mach 1 said:

Ram air, center console, shifter, zbar, clutch pedal and steering wheel are gone.

 

Left to sell is 4 speed toploader with bell housing and clutch fork, center bezel with 3 gauges, Speedometer, Tach and fuel gauge.

How much for the center bezel with the 3 gauges... Very interested...

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...