4sp72mach
Active member
- Joined
- Dec 17, 2018
- Messages
- 25
- Reaction score
- 6
- Location
- Sweden
- My Car
- 1972 Mach1
351-4V CJ
4 speed
Gold glow
Hi, I just now mounted my "new" rear frame to a frame jig. It's mounted to the jig in the leaf spring holes in the positions given in the Underbody dimensions diagram for 1972.
I expected the rocker to sit parallel to the base line, but it really doesn't. The front of the car will sit much higher.
I double checked all dimension but just want to confirm if this is how it should be?
Also it seems like there are very few height dimensions overall in the diagram. Like for rockers, front and rear floor frame rails etc. Are there additional dimensions to the diagram? Pretty hard to put everything toghether correclty with this little data.
I expected the rocker to sit parallel to the base line, but it really doesn't. The front of the car will sit much higher.
I double checked all dimension but just want to confirm if this is how it should be?
Also it seems like there are very few height dimensions overall in the diagram. Like for rockers, front and rear floor frame rails etc. Are there additional dimensions to the diagram? Pretty hard to put everything toghether correclty with this little data.
Last edited by a moderator: