Jump to content

Driver mirror dissasembly


Recommended Posts

Hi all does anyone know how to remove the cable assy from the drivers side Mach 1 mirror it looks like the cables are crimped in both sides I have removed the actual mirror without breaking it and the cables have tiny ferrules crimped to them.

im thinking I may need to mask them up and paint as an assembly?

any ideas welcome.

regards

Terry

Link to comment
Share on other sites

Terry we are living parallel lives.  I posted the same question about a month ago.  After reviewing the responses, and studying the mirror again, I decided to figure out how to paint it together.  So I am using jigs and stages for painting.  Stage 1 of painting is the backside/inside.  Stage 2 will be the outside.  You can see the mirrors on the far end of table in the attached photo—this is stage 1.  It isn’t pretty, but it worked.  The part nobody will ever see turned out great with careful gun work.  I can post a picture of just the box layout if you think my plan isn’t completely stupid.  Stage 2 will be a completely different setup, but basically the mirror heads just drop over something to stay in place, same thing for the bases.

DA607A8B-581C-4A0D-A28C-0092D3352ABE.jpeg

spacer.png
1931 Ford Model A Station Wagon
1969 Mach 1 - 351C, TKO-600, 4WDB, R&P, A/C, Shaker, Fold Down, etc.
1972 Mach 1 - 351C, FMX, PDB, PS, A/C, Fold Down, Console
1996 Mustang Cobra Convertible - 10psi Procharger, 436rwhp

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...