mustang_maria73
Active member
- Joined
- Apr 23, 2019
- Messages
- 36
- Reaction score
- 0
- Location
- Dallas/Ft Worth, TX
- My Car
- '73 q code convertible 4 spd
Let me start with I'm a beginner and have minimal knowledge but am willing to try. My driver's side front power window stopped working when it was down. I took the panel off so I could see what was going on and to lift my window back into the up position (had a little furry friend want to take up residence with the window down). I disconnected the power and pulled the glass back up. Connected it again to test it and I can hear the motor try to work. Looking down through the door when I do this, I can see the gear isn't moving. Do I need a new motor or just a gear? I was trying to get the motor out to look at it closer but couldn't figure out to do it. I looked all over the door and it appears welded or I don't know the trick to get at the motor. HOW in the world do I get the the motor out? Please provide specific details if you can. I also see a date on the current motor (4/15/02) so it appears that the motor has been replaced once at least.
Also, when I took the panel off and was looking at the window electrical connections there is a red connector not plugged into anything. I'm guessing it should be. See pics. What does it go to? Should I be concerned? Thoughts?
I would greatly appreciate any help with this!
Also, when I took the panel off and was looking at the window electrical connections there is a red connector not plugged into anything. I'm guessing it should be. See pics. What does it go to? Should I be concerned? Thoughts?
I would greatly appreciate any help with this!