Wipers wrong position

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Copestang

Well-known member
Joined
May 11, 2017
Messages
132
Reaction score
1
Location
Michigan
My Car
1973 Mach 1
when i turn the wiper off they stop in the up position how do i change this, it’s is a new wiper motor 

 
When it came in, was the short actuating arm attached to the output shaft of the motor?  If so, it could be attached incorrectly, and so the wipers would be 180 degrees out of phase.  If you decide to pull the motor and change the arm to check it, DO NOT attach the arm to the transmission before you actually check the operation of the motor again.  You risk running your wipers right into the paint on your cowling.

 
Back
Top