Looking for about 4" of rim blow horn switch

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Animal Lawyer

Well-known member
Joined
Sep 3, 2020
Messages
279
Reaction score
37
My '73 vert has a working rim blow steering wheel, however, at the bottom there is about 3-4" where there is no rim blow. As the rim blow works, I prefer not to spend $200 to fill in the small area, but, as this is where my fingers usually rest, I need to do something to fill it in. a piece of old rim blow switch should epoxy in rather seamlessly, I would think.

If anyone has a dead rim blow switch and would be willing to part with about 4" I would be grateful. The only alternative I can see is trying to build up a patch with a liquid rubber and trying to shape it,

I am open to other solutions, too

Rich

 
Back
Top