Jump to content

Recommended Posts


As you already have the correct spring plates for the sway bar, as long as the holes I showed on the frame have the weld nuts inside, it ought to be a simple job. If the weld nuts are NOT there, then perhaps you can locate those U bolts shown in the sketch, or in worst case, weld the mount brackets. One thing anybody installing one of these bars ought to look at is the spacer I show to relocate the clip that holds the vapor return line. This is needed because the new bar does not have enough clearance in front of the tank. 

Good luck and enjoy your trip.

  • Thanks 1


 I learn something new every day!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...