• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

351 Cleveland Engine for sale

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 19, 2021
Messages
1,342
Reaction score
934
Location
Fort Mohave, AZ & So Cal (Upland)
My Car
73 Grande will undergo three phase build process. Phase 1 is complete (driver). Phase 2 is interior/exterior restoration. Phase 3 is ++ performance.
I have a 351c 2v out of a 1973 Grande. It is a mostly complete engine, but is missing parts. Here are pics of the assembled engine:










image.jpeg

/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.vintage-mustang.com/attachments/95a87c1f-6ef6-476d-b0d4-b1f8886c1dd1-jpeg.797464/






I also have the following parts not assembled to the engine.

44597b8a-4b16-42c1-9241-8ba235102abe-jpeg.797465


I also have information and many more pictures of the internals, bore measurements, etc if you’re interested. We can discuss delivery as well, as the engine is on the stand in Fort Mohave, AZ; but anywhere between the Ca/AZ border and Southern Cal is possible for delivery.

Asking $350 for all shown and a few more parts too. Thanks, Steve

 
What are you asking for it? Its a 2V engine. I have sold a dozen of those or so and I have gotten generally $300 for a bare block with main caps and $500.00 for a complete standard motor.

 
I’m asking $350. The engine is missing the rocker arms, rocker arm bolts, one pushrod, and the timing plate. Also, it is missing a few head bolts, intake bolts, and exhaust manifold bolts. I pulled it apart and measured several cylinders; most were about .010 over the standard bore. There is no sign of any cracks, damage, etc.

Is this not a good place to sell this engine?

 
Typical condition of all cylinders

631F98E6-45DB-412E-812B-EFCBF0CB50CE.jpeg

The bore diameter of the 1-4 bank; this was the average.

709A37ED-1A27-4F2A-9586-5416CE4E575F.jpeg

What the combustion chamber looked like; all looked like this.

637DD8A7-3218-491C-996A-BEAA6AB126F9.jpeg

Valve train, both looked like this.ACBD8CC1-6945-409B-B5D4-1EF11A2ED891.jpeg

Engine ID info.

17A0AAD8-E616-44FF-8A68-496A27FF37E8.jpeg6211EF5C-27EA-4018-9AB5-47AE230A544B.jpeg

1ADA4AAD-6C10-483D-B0CB-BF934762966F.jpeg

 
Back
Top