Jump to content

RIBS 71 convertible build JUNE 21 till??

Recommended Posts

Hello all,

I will start with the history I know of the car, whether real or imagined.

1971 Grabber Blue/white top/white interior 302, C4 auto, 2.79 rear axle.

Apparently the owner in the mid 90’s had restored the car to show condition in NJ, and took it to shows often. The story is he was at a car show, and the show tent next to him caught on fire and fell onto this car. It thought the story was a reach until I saw the car. That owner did some repair work and then sold the car in 97 to the guy I bought it from. In the 23+ years the last owner had it, he lightly bolted on an aftermarket front fender, added an Edelbrock intake and 4v carb, and halfway installed a new white top. In the entire time he owned it he drove it 80 miles.  Supposedly the engine and transmission are original and rebuilt, I have not dug deep into that yet.  

I have been all through the car and it does appear to be an older restoration, in very good shape, but still needing a lot of work. It has rust in the trunk, and the door latch pillars, they will need some metal work at the base.  there is also rust in the area of the fire, mostly surface stuff to repair. The biggest challenge is going to be the electrical system, apparently Half the engine bay wires, and some of the dash wires were destroyed..it appears a 73 harness was hacked into place poorly, with at least 20 exposed bare  wire ends hanging in space, I will probably rewire the car after metalwork, before paint. The interior was also burned somewhat, the dash and front sets and steering wheel is out of a 73, the steering column needs a rebuild…the entire white interior has now been sprayed black…there’s still burn marks and scorched hardware to replace some 25 years later!

Marti Report and a billion pics to follow!

To date I have done the following fixes:

wheels and tires on order to replace 25 year old rubber 

throttle linkage and kick down lever rebuild, the zip ties are gone!

added a fuel filter, there was NONE

Engine tuneup, plugs, wires, distributor cap, rotor

Oil change

stripped interior to check body integrity and for rust

repaired top hydraulic system


fixed stripped oil pan drain plug

currently the car is on jack stands getting a full brake job.



Edited by RIBS
Link to comment
Share on other sites

Just a couple other notes,

it’s a complete running car, I have the complete interior and all trim, as well as the top. The floorpans are solid, they are covered with glue and foil backing from the insulation padding I pulled up…I have a basement full of old spares and new reproduction parts I am acquiring.

it should be back on the road in a week after brakes and wheels and tires are complete…then it’s bit by bit repair and restoration…

Link to comment
Share on other sites

Very good bones! I also have a grabber blue 71 vert. Have had it over 26 yrs and never driven it. That green steering wheel sticks out! Anxious to hear how things go. 

Wisdom, knowledge and intelligence are three very different things.

1971 convertible, H-code, Ram Air

1971 Mach I, M-code, Ram Air

1972 Mexican GT-351

1988 Bronco II

Link to comment
Share on other sites

Nice project! 

[align=left]Jeff T.


When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passengers. [/align]

Link to comment
Share on other sites

An update, my 3-5 day brake job is going to be more like 3 weeks, once I disassembled I found I needed more parts, once I got those, I attempted to remove soft lines from hard lines, and of course all sorts of bad things started happening..I have new hard lines coming, going to replumb parts of the car, that’s going to add a week or two…I do have 3 of 4 corners rebuilt, need hard lines to connect a few….



Link to comment
Share on other sites

Nice project :thumb:

Do yourself a favor and don't save up on the brake system. New hard and soft lines + other components will work miracles!



Never drive faster than your guardian angel can fly :runninpony:

Link to comment
Share on other sites

8 minutes ago, Sheriff41 said:

The tire and wheel combination looks good.  Amazing they got the tires on the wrong wheels, though.  What tire sizes did you go with? 

235/60/15 for the 15x7s

245/60/15 for the 15x8s

So a slight stagger.

This is what’s been tested and recommended and is sold by CJ Pony and others.

  • Like 1
Link to comment
Share on other sites

Nice build. Love the Grabber Blue. I grew up not too far from the dealership where your car was originally delivered to on Rt35 in Manasquan NJ.

Good luck with  it.

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle


satellite.png Proud Space Junk Award Winner!














Link to comment
Share on other sites

All hard lines stripped out, and new ones installed. The distribution block is out and stripped down and cleaned. 
All the new lines are in and routed and reattached finger tight.

Everything was so full of rust and goo so I also ordered a new master cylinder. It’s should be here Tuesday. 

I have a friend that’s an expert auto guy coming this week to tighten everything up and help with final installation…

you guys were right, cut the lines, use heat, vice grips and replace everything!

I hope to have everything tight and together and Brakes bleed by next weekend!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Summer Raffle 2021!

    Get your Summer 2021 Raffle Entries NOW!!

    Click the button below to go to our forum donation page and select your choice of 1 entry for $5 or 5 entries for $20 from the donation dropdown menu!

    Buy Now!
  • Create New...