Need correct measurement on bottom of radiator support

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 19, 2021
Messages
1,342
Reaction score
934
Location
Fort Mohave, AZ & So Cal (Upland)
My Car
73 Grande will undergo three phase build process. Phase 1 is complete (driver). Phase 2 is interior/exterior restoration. Phase 3 is ++ performance.
image0 2.jpegHello:

I’ve got a radiator support to move back into its correct location and before I start, I thought I’d ask if someone could measure their unmolested car and give me the measurement between the top seam on the front cross member to the top seam of the radiator support. I took a pic of mine with the tape measure at the middle of the span of both parts to illustrate where I believe I need the distance. Thank you and no hurry, I’m a ways from starting, just didn’t want to ask in a haste.

 
the radiator mounting brackets should give you a pretty good idea of it.  They bolt to the front crossmember and to the radiator support.  

When I installed mine, I made it so the radiator brackets fit in snug between those two pieces.

 
Last edited by a moderator:
Back
Top