Thanks for response Kilgon,
A little history about shifter. Until about seven months ago shifter movement was very loose and sloppy. An old plastic bushing was replaced and everything was working perfect again. Shifting through all positions smoothly.
Last couple weeks have been reinstalling interior including console assembly (2 pieces).
1.Moved Shifter to neutral position as instructed by shop manual .
2.To install shift indicator console the T handle must be carefully removed by loosening Allan screw and slowly lift handle off lever.
3. After installing console I reversed method to reinstall T handle. Moved shifter to (P)ark, then to (R)everse and (N)eutral (D)rive but when I moved to 2 and 1 it would not go. as I pulled back from D to 2 it felt like something interfering not allowing lever to move to 2.
4. Went back, removed console looked closely down shifter box but could not see anything that appeared to interfere.
Thank you in advance for anything you think I may have forgot.
Regards, Outrider4