Jump to content

What did you do to your car today?


droptop73
 Share

Recommended Posts

Spent the weekend working in the garage. Lost way too much time finding things that I had put in "safe" places to not lose them. Did manage to get the 351C on the stand and do some parts fit-up to minimize any futzing about when it's sitting in the engine bay. Finished cleaning the majority of the engine bay, seems no matter how much I clean, there's still dirty areas. Going to leave it as is for now, will really detail it over the winter. Focus right now it to get the engine in and running. Touched up some little rust spots and fixed all the wiring to about where it'll end up. Can't find the correct Autolite regulator cover I had, so stuck a Motorcraft on there for now. 

Next step is to finish the reassembly of the toploader and the shifter, then it'll be time to do some subassemblies and drop it in. 

 

PXL_20210627_224936622.thumb.jpg.56a126c598d1915894d2ce8e3640878c.jpg

 

 

PXL_20210627_230621782.thumb.jpg.39dfd57637512b1c168115a498c208e1.jpg

  • Like 2

 

 

Link to comment
Share on other sites

7 hours ago, Hemikiller said:

Spent the weekend working in the garage. Lost way too much time finding things that I had put in "safe" places to not lose them.

Oh yeah, I know that feeling... :classic_dry: Almost every time I go in the garage to reassemble anything with new and old parts together... 

Nice to see you move on, engine bay looks still good :thumb:

 

Tim

 

Never drive faster than your guardian angel can fly :runninpony:

Link to comment
Share on other sites

Drove it about yesterday and today , found my suspension rattle is due to brake pads, calipers . Got home to a hissing sound from the right hand side.....heater core gave up.

 

Got her back to the shop bypassing the heater core and spent most of the morning lifiting carpets, removing the underlay and soaking coolant up from the carpets. 

 

Good news it drives. 

  • Great post!  Let me buy you a beer (or coffee!) 1
Link to comment
Share on other sites

Drove it to work two days in a row now, starting to compile a list of things that need some attention...10 years of garage time has clouded my memory of what was good and bad on the Mustang. But grinning ear to ear everywhere I go! :) 

  • Like 1

large.fredensborg.jpg.ea0287683b42221ffb
Jason
1973 Mach1 Q-code

My carbon footprint is exceptionally large.

Link to comment
Share on other sites

Got my dash back in over the last few days. Got the voltmeter wired correctly. I checked most of the wiring that I could by jumping from my truck to the engine bay harness. Lights working like they should but I think the brake switch needs replacing (I put the original in and it seemed to work ok on a bench check).

20210705_222956.jpg

  • Like 2

Wisdom, knowledge and intelligence are three very different things.

1971 convertible, H-code, Ram Air

1971 Mach I, M-code, Ram Air

1972 Mexican GT-351

1988 Bronco II

Link to comment
Share on other sites

Posted (edited)
6 hours ago, Fredensborg said:

The kids and I attacked the mustang today with dish soap, wax, armor all, several rolls of paper towels and q-tips. It was a deep clean for the ages, and my little army of helpers had a blast!! We have been having so much fun since we got the mustang back up and running!! 

CA69E8D4-8D2B-4212-8F2D-62DE0AA9101A.jpeg

8A760C28-0586-4C79-8CF4-CAB8CE78AD1D.jpeg

A5E2F7F0-F962-424D-8ABB-2331E37750E7.jpeg

916C6C34-DFE7-40F2-AE9A-95A13BA4313C.jpeg

8423D30E-16EB-4A9F-82FE-81E80ED001A3.jpeg

0BC2F40D-89BB-421B-B817-C8BCD9F76EB4.jpeg

05169F9A-9686-47E9-91A7-D8033DE60625.jpeg

43FC1A6A-3BAE-4765-931E-7CB0DFF96805.jpeg

F86B6D80-D8E4-465F-915D-2072358BC01E.jpeg

6ABF60CC-3F53-4289-BC59-C4538259119C.jpeg

A2EBB785-3BDE-4ED7-9D16-3DAE835F33FF.jpeg

1831AB74-DEA6-4A8F-83E3-B5A4E8B9F085.jpeg

865CAFC7-5107-40A9-8F3C-B87761C29EFD.jpeg

45D6B671-8FD3-4D01-940E-6B8743F6B065.jpeg

3245B4B6-9FB7-4638-A82E-B1AF1D24E312.jpeg

8509BC4F-B316-4A5D-86A5-207A2C2C4FDB.jpeg

2521493B-7D74-4B46-B082-FA191807E879.jpeg

Jason-  I sure wish I had a team of little helpers helping me!  Fun times for sure and the results from your photos speak for themselves.  Very nice.

Edited by Idaho Chris
  • Fist Bump 1
Link to comment
Share on other sites

Performed some surgery on the old Barry Grant speed Demon carb.  It did not have adjustable air bleeds.  After some drilling and tapping it now does.  
 

 

36F02D62-CDB0-44F5-90CC-989DEB348CE0.png

4E2E82F6-480B-413E-BD3C-B761E1566FFB.jpeg

Edited by Bentworker
  • Like 1
Link to comment
Share on other sites

OMG saw the post of using Armor all. DO NOT EVER USE AROMOR ALL ON ANYTHING. That is the worst thing you could ever use. If in a shop doing paint work will cost tens of thousands of dollars due to silicone in it. NEVER USE IT........

  • Thanks 1

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

I pulled the pedal box out (a much more difficult job than I anticipated) and added the clutch pedal in anticipation of the new T-5 install.  Of course there is always something...when dropping the steering column I discovered the rag joint was shot so I have ordered a new one.

My new heater core should be here this week so I'll tackle that project next before putting the interior and new carpets back together.

Hoping to drop the old FMX transmission tomorrow.

 

 

20210708_145238.jpg

Link to comment
Share on other sites

On 6/28/2021 at 7:29 PM, Hemikiller said:

Spent the weekend working in the garage. Lost way too much time finding things that I had put in "safe" places to not lose them.

 

I am glad I am not the only one. All I will remember is that I placed them where it makes sense, but I will only find them after I wasted hours. Sometimes I even forget that I had such parts!

20160929_171923_edit2_small.jpg

 

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump

Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes

Link to comment
Share on other sites

Well, the old FMX is out.  Damn is that thing heavy.  The new T5 will save me about 75 pounds.

Brake parts and the new rag joint arrived this afternoon.  Tackling those items before moving to install the new transmission.

 

20210712_102815.jpg

20210712_102839a.jpg

20210712_122011.jpg

20210712_114701.jpg

  • Like 1
Link to comment
Share on other sites

I finally got it out for a drive Sunday. There are still some electrical gremlins to work out but it runs and drives great. 

IMG_3516.JPG

  • Like 2

[align=left]Jeff T.

 

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passengers. [/align]

Link to comment
Share on other sites

On 7/13/2021 at 7:56 PM, Aus73Mach1 said:

 

 

20210713_170504.jpg

i really like that.

73 ragtop, 1999 Mustang Bright Atlantic Blue Paint, Phoenix Engine 302-335HP,  Edelbrock Carb & Performer manifold; c4 with 2000 stall and shiftkit; 3:55 auburn limited slip differential, Hedman shorties; Car Chemistry Exhaust

 

Classic Air; Tilt Steering Wheel; 1999 Chrysler Sebring bucket Seats ; power windows;

Link to comment
Share on other sites

33 minutes ago, Idaho Chris said:

Installed the new Tremec T5.

20210718_122418.thumb.jpg.8236e6c6866679f7dddd3d155e93496d.jpg

Once I got the bell housing installed I needed to index it.  The opening needs to be aligned within .005 of the crank shaft.  This is normally a two person job, with one person spinning the crankshaft and the other watching the dial indicator.  Since I don't have any convenient help I had to do it solo.  By taking a reading every 45 degrees I was able to verify that I am within spec.  Good news since I really did not want to try and remove the 50 year old locating pins!

Here's a shot after clutch and throw out bearing installation:

20210718_165113.thumb.jpg.ac1f5be264fbb772a66521769214de69.jpg

Now ready to slide in the transmission.  With everything lined up it slid in like butter!

20210719_091351.thumb.jpg.58f7cfa6a05c3c5e034126c6ce7f1240.jpg

Finished with clutch cable and speedometer hooked up:

20210719_132610.thumb.jpg.cb601b3a50dda56a960d271601e006d5.jpg

The shifter came right up through the stock automatic transmission shifter hole without modification.  Oh yeah!

20210719_132905.thumb.jpg.ccf091703f92c205ed8803043400983c.jpg

Time to install the new rear end so I can get the driveshaft measured and ordered.

 

Very good, all went well, congratulations :wrench:

Tim

 

Never drive faster than your guardian angel can fly :runninpony:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...