Jump to content

351C - 2 barrel heads


bkdunha
 Share

Recommended Posts

I have a friend with a very nice 73 convertable who is looking for a decent set of 2 barrel heads. Looking for an original set not machined at all to replace his. If you have any please send photos and the condition of the heads. I will play the middle man in passing along to him. He would like to find something in the next couple of days.

 

Thanx,

Brian D.

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

He is not doing a date correct restoration. I will be in southern WI the week of the 26th.Not sure if I can make it all the way over to your place. How much would they weigh??? I might have a shipping option? What condition are they in? You can PM me with any details.

 

Thank you

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

I have a set I took off my 67K mile 73 Mach 1, rebuilt my engine and put aussie heads on it. Have stock cam, rocker arms and push rods too. Complete. Not sure on shipping

 

Please PM me if you can on the price. I have a shipping option. Do you have any pictures?

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

I have a set of aussie heads sitting around.. they are bare, not machined.. It looks like they have had some repairs over the years (pressed in valve seal, a couple guides were changed).

Link to comment
Share on other sites

I have a set of aussie heads sitting around.. they are bare, not machined.. It looks like they have had some repairs over the years (pressed in valve seal, a couple guides were changed).

 

Please PM me with priceand any photos available.

Thank you

 

 

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

I have a set of decent 2v heads from a 1973 cleveland. They may very well run fine but I recomend getting them rebuilt. Should only need seals and valve job, the motor was very clean inside.

Sorry I dont have pictures, they are stored inside a drum of used oil to prevent rusting.

$150 delivered to you, $100 picked up

pm me if interested

mustangnight010.jpg

1972 Mustang Convertible 351C 4V

1966 Ford Galaxie 7 litre-4speed

 

Jorge

Link to comment
Share on other sites

  • 4 months later...

I have a set, never ran them, but they look pretty original and clean and the block they came off of looks good, I am in TN if you are anywhere near Nashville you can come look

http://www.7173mustangs.com/gallery/1_01_07_15_8_53_18.png

 

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!

Link to comment
Share on other sites

Thank you for the offer. I neglected to post a couple of months ago that he found some locally and has the car up an running.

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...