Jump to content

center dash w/gauges


Recommended Posts

Hello Stang Gang!

Dies anyone know where I can get the Wood Grain Decal that goes on the center dash with the 3 gauge setup? I found pnes without the gauges but none with!

1973 Mach 1 429 cu. in. H.P. TBD, C6 Reverse Manual Valve with 3500 Stall Tranny, 9" rear 3.90 PosiTrac

2007 Mustang GT Convertible Premium

Link to comment
Share on other sites

I'm pretty sure that NPD carried one in their catalog

1_14_01_12_10_54_29.png

 

Ken

 

73 Convertible 302-4v-3spd yellow /white int

 

08 Bullitt 4.6-5 spd black/black int

 

 

All I ask is a chance to prove that money can't make me happy

[button=http://www.7173mustangs.com/forum-garage?filterxt_uid=327]Visit My Garage[/button]

Link to comment
Share on other sites

I found one on ebay a couple of years ago. Paid way too much, it fit poorly, and didn't stick. Other than that it was great! Call Don at OMS, bite the bullet and buy a new bezel with the woodgrain on it. WARNING, it will look so good you will want all new bezels. Chuck

Link to comment
Share on other sites

Or you can match it with the 3m wood grain vinyl..If your skill level is up to the task of cutting installing your own

 

http://www.metrorestyling.com/category-s/1228.htm

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART

Link to comment
Share on other sites

I'm pretty sure that NPD carried one in their catalog

 

The only one I saw at NPD was w/o gauges! :?(


I found one on ebay a couple of years ago. Paid way too much, it fit poorly, and didn't stick. Other than that it was great! Call Don at OMS, bite the bullet and buy a new bezel with the woodgrain on it. WARNING, it will look so good you will want all new bezels. Chuck

 

I hate to do That, I just cut it all up to fit AutoMeter gauges in it and painted it up! It looks great so far!!!!


Or you can match it with the 3m wood grain vinyl..If your skill level is up to the task of cutting installing your own

 

http://www.metrorestyling.com/category-s/1228.htm

 

I was able to get enuff of the old one off to make a template out of it and will try to locate a local shop that does vinyl sign work to possibly duplicate it or I might just try to do it myself if I cant find one!

1973 Mach 1 429 cu. in. H.P. TBD, C6 Reverse Manual Valve with 3500 Stall Tranny, 9" rear 3.90 PosiTrac

2007 Mustang GT Convertible Premium

Link to comment
Share on other sites

  • 3 months later...

Hello Stang Gang!

Dies anyone know where I can get the Wood Grain Decal that goes on the center dash with the 3 gauge setup? I found pnes without the gauges but none with!

 

When you find the least, a kit that you can prefabricate as the dash apart if it isn't apart is something I will never do again. I have the kind of door inserts that wood grain and would be a nice touch there, on console as well around speedo and tach would be super!!!! Good luck. Maybe Hemmings motor new might help. If you have a subscription, the first inquiry I believe is free but it's not that expensive to advertise through them. Wood grain item you are talking about is not secluded to 71-73's as you recall some Shelby models. Even if you can trace out the area, I know Hemmings classifieds or subscribers would know where you can get the material then at the most, can have it installed by an interior man.

1_12_09_14_11_07_03.png
Link to comment
Share on other sites

  • 1 year later...

Hey guys, has anyone tried the 3M di-Noc or Rwrap films?

Materials are reported to be form fitting with the aid of a hairdryer. Online instructions look pretty straightforward - trim piece of film to approximate size, heat to activate adhesive, use squeegee or fingers to apply to panel and massage around gauge housings. Use exacto knife to trim to your perfect fit.

 

We're gonna try this to match our door panels to the new GT Performance steering wheel.

[button=http://www.7173mustangs.com/thread-1973-mustang-convertible--19017]Visit My Garage[/button]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...