Engine gauge feed

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

CTGSTANG

Well-known member
Joined
May 10, 2011
Messages
78
Reaction score
0
Location
Brandon, FL
My Car
1972 Mustang Convertible red/white interior. Engine: 302 V8 w/air, upgraded Edelbrock Performer RPM Intake, Petronix, Holly 600cfm carb, power windows.
I just got a new engine gauge feed to install in the 302, part #72-gift-8 cyl. Not sure where to begin. Do I have to take out my instrument panel or can I install it from the firewall side? Any pics would be great!

 
Yes, it plugs into the headlight harness in the engine compartment. Look for a 3 prong flat plug (71), or a 4 prong flat plug (72/73); each plug has one male pin and the rest are female. Your gauge harness should have a matching plug.

 
Last edited by a moderator:

Similar threads

M
Gauge Cluster Pinout on Circuit Panel
Replies
0
Views
387
MustangGuy2k
M
G
Adding center gauges to a car that didn't come with them
Replies
12
Views
2K
Mister 4x4
Mister 4x4
Steve McMahan
Does the back of my instrument cluster (IC) look right?
Replies
9
Views
690
Mark Jones
Mark Jones
J
1973 351C-4V Engine Gauge Feed Wiring and Vacuum Hose Mystery
Replies
8
Views
629
Doug's 73 Mach1
Doug's 73 Mach1
B
Crank no Start
Replies
11
Views
997
cjstaci
cjstaci

Latest posts

Back
Top