- Joined
- Oct 2, 2012
- Messages
- 257
- Reaction score
- 35
- Location
- Arkansas
- My Car
- 1972 Ford Mustang Convertible
Does anyone have engine pictures of the choke tube routing on a 1972 302-2V automatic with factory air?
Perfect, I am working on the Stang Saturday, Thank you!Yes, I can post it tomorrow for you.
Thank you!Then place where they fit is located on the left side manifold they fit on a small squarish part of the manifold casting near the rear of the manifold at the bottom
the tubes enter the manifold in two holes that are near each other with the one that connects to the choke on the top and the one that connects to the carb below it on the side.
If you do not see them holes the old tubes may have rotted off and obscured them or they got filled with debris over the years
Wow, thank you so much for your effort! That is exactly what I needed. My base on the manifold is actually in good shape. Did the 72 Stangs only have one choke tube? Does the empty port on the carb need to go to anything? Mine does not have anything connected to it either.Sorry it took me longer to get the pics than I thought.
I bought the kit from Mustangs unlimited $14 part # UNI9819KIT 01
http://www.mustangsunlimited.com/itemdy00.asp?T1=UNI9819KIT+01
here is how I have it mounted.
the orig tube rotted right at the manifold, I hope these pictures help.
Also, I do not have a hose from my PCV on the value cover to the back of the carb. Everything is missing. What is that cylindrical thing on the back of the carb that looks like a fuel filter. Do you know where I can get all of the parts to connect from the PCV on the value cover to the carb??????Sorry it took me longer to get the pics than I thought.
I bought the kit from Mustangs unlimited $14 part # UNI9819KIT 01
http://www.mustangsunlimited.com/itemdy00.asp?T1=UNI9819KIT+01
here is how I have it mounted.
the orig tube rotted right at the manifold, I hope these pictures help.
You were a big help on the choke tube, thank you! Do you have any pictures of the Heater hose routing? I have the one from the intake to the valve to the firewall figured out. I would like to know where the one from the water pump to the firewall goes. Does it just follow the other one???Sorry it took me longer to get the pics than I thought.
I bought the kit from Mustangs unlimited $14 part # UNI9819KIT 01
http://www.mustangsunlimited.com/itemdy00.asp?T1=UNI9819KIT+01
here is how I have it mounted.
the orig tube rotted right at the manifold, I hope these pictures help.
I have a motocraft 2100 carb that looks identical to your's could you let me know the lenth of the choke pull off rod?Sorry it took me longer to get the pics than I thought.
I bought the kit from Mustangs unlimited $14 part # UNI9819KIT 01
http://www.mustangsunlimited.com/itemdy00.asp?T1=UNI9819KIT+01
here is how I have it mounted.
the orig tube rotted right at the manifold, I hope these pictures help.
Enter your email address to join: