S Shaped Heater hose and heater valve

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Last edited by a moderator:
The valve does not bolt to anything. One side goes into the "S" shaped hose, the other goes into the straight heater hose. Basically it is suspended by the heater hoses. Chuck

http://www.429mustangcougarinfo.50megs.com/images/heatervalve3.jp
Thanks a lot!
There is a arrow on the value, does it go toward the firewall or away? Also, there is a vacuum port, does this draw vacuum from the back of the carb??? I have a empty port on the back.
The port for the diaphragm on the valve faces the front of the car. The vacuum is switched from the heater control inside the car and passes through the upper, center of the firewall as part of a two hose molded "grommet". Chuck

 
Back
Top