Its time...

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Give me a shout if you need a hand Sunday. I have a cherry picker if you need one as well.
Thanks for the offer. I will be doing it on sat as i have to work Sunday. Usually i have sunday off but not this week. I have a old cherrypicker that should work. I'll take a few pics with my phone.

 
Bag and label stuff
every nut and bolt is bagged and labeled


got it out last sat

748F48AB-EF93-4911-80AC-86DD74D3A116-3862-000002C461C85FF1.jpg


878724E0-212E-4E59-BFEC-BA363E8857CF-3862-000002C47440FBDB.jpg


8C6562AE-C577-4B98-B699-522195203A24-3862-000002C49462C6BF.jpg


 
Last edited by a moderator:
No hood, no bumper, no fenders and you cut the exhaust. It's almost like you cheated. ;)

I just pulled the motor from my wife's 2002 liberty. SO MANY FLIPP'N electrical connectors! What I did with bolts/nuts is used tie wraps and tie wrapped them in place. So like, when I pulled the alternator, I took the three bolts, put them back in their correct holes and then used a tie wrap on each one to hold it in place. I am not doing any 'clean up' or stuff like that...

 
Back
Top