Grabber Lime Update - Rear Wheelhouse Undercoating

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 27, 2010
Messages
1,710
Reaction score
226
Location
Canton, MIchigan
My Car
1971 429 CJs: Grabber Lime, Grabber Blue, White, Dark Green Metallic (2), Pewter, Red Convertible 1972: Sprints (3), 1973: Pink Convertible (2)
Has been a while since I last worked on the Grabber Lime car, but it is time to get back at it and get it finished so I can start on the next restoration.    Axle was completed over the summer, so just got the new wheels/tires and all new brake components for the front brakes.   Needed to put factory type undercoating in the rear wheel wells, so the last restoration I finished I found that if I used 3M brushable sealer and dabbed it on with the end of a plumbing brush, then used rubberized undercoating over it, the texture came out closer to factory than any other way I tried.   Here are pictures of the seam sealer in gray, then the undercoating.   Not exactly like the factory, but appearance is close.   Should have the front brake parts on in the next week, so should be able to put the car on the ground for the first time in 5 years!!!

IMG_1312.JPG

IMG_1323.jpg

IMG_1324.jpg

IMG_1326.jpg

IMG_1327.jpg

IMG_1328.jpg

IMG_1329.jpg

IMG_1330.jpg

IMG_1331.jpg

 
Hopefully the US border will be fully open soon, i.e. NO PCR test before returning to Canada as I'm FULLY VACINATED so I can "kill two birds with one stone" so to speak and get to NPD and a visit your shop so I can see that beauty for myself. It is absolutely MY dream car, but way out of my reach.......... unless I win the lottery!!

 
Hopefully the US border will be fully open soon, i.e. NO PCR test before returning to Canada as I'm FULLY VACINATED so I can "kill two birds with one stone" so to speak and get to NPD and a visit your shop so I can see that beauty for myself. It is absolutely MY dream car, but way out of my reach.......... unless I win the lottery!!
You are welcome over anytime.  

 
Has been a while since I last worked on the Grabber Lime car, but it is time to get back at it and get it finished so I can start on the next restoration. Axle was completed over the summer, so just got the new wheels/tires and all new brake components for the front brakes. Needed to put factory type undercoating in the rear wheel wells, so the last restoration I finished I found that if I used 3M brushable sealer and dabbed it on with the end of a plumbing brush, then used rubberized undercoating over it, the texture came out closer to factory than any other way I tried. Here are pictures of the seam sealer in gray, then the undercoating. Not exactly like the factory, but appearance is close. Should have the front brake parts on in the next week, so should be able to put the car on the ground for the first time in 5 years!!!

View attachment 56115

View attachment 56116

View attachment 56117

View attachment 56118

View attachment 56119

View attachment 56120

View attachment 56121

View attachment 56122

View attachment 56123
wasnt the undercoating an option ? or was it standard ?
 
Has been a while since I last worked on the Grabber Lime car, but it is time to get back at it and get it finished so I can start on the next restoration. Axle was completed over the summer, so just got the new wheels/tires and all new brake components for the front brakes. Needed to put factory type undercoating in the rear wheel wells, so the last restoration I finished I found that if I used 3M brushable sealer and dabbed it on with the end of a plumbing brush, then used rubberized undercoating over it, the texture came out closer to factory than any other way I tried. Here are pictures of the seam sealer in gray, then the undercoating. Not exactly like the factory, but appearance is close. Should have the front brake parts on in the next week, so should be able to put the car on the ground for the first time in 5 years!!!

View attachment 56115

View attachment 56116

View attachment 56117

View attachment 56118

View attachment 56119

View attachment 56120

View attachment 56121

View attachment 56122

View attachment 56123
Looks great! The whole car is turning out awesome, nice job! It looks like you have a really nice shop there. What size wheels and tires did you go with?
 
Has been a while since I last worked on the Grabber Lime car, but it is time to get back at it and get it finished so I can start on the next restoration. Axle was completed over the summer, so just got the new wheels/tires and all new brake components for the front brakes. Needed to put factory type undercoating in the rear wheel wells, so the last restoration I finished I found that if I used 3M brushable sealer and dabbed it on with the end of a plumbing brush, then used rubberized undercoating over it, the texture came out closer to factory than any other way I tried. Here are pictures of the seam sealer in gray, then the undercoating. Not exactly like the factory, but appearance is close. Should have the front brake parts on in the next week, so should be able to put the car on the ground for the first time in 5 years!!!

View attachment 56115

View attachment 56116

View attachment 56117

View attachment 56118

View attachment 56119

View attachment 56120

View attachment 56121

View attachment 56122

View attachment 56123
Looking forward to seeing that Grabber Lime on wheels for the first time! Well done!
 
wasnt the undercoating an option ? or was it standard ?
I've wondered this as well. I have this sample in my glovebox. Not sure if it was made as a sales tool, or just explaining what your car came with. Funny enough the book looks Grabber Lime. LOL. Just like the stuff under the car, this sample is still in perfect shape.
 

Attachments

  • 20231125_092557.jpg
    20231125_092557.jpg
    947.5 KB · Views: 0
  • 20231125_092616.jpg
    20231125_092616.jpg
    661.1 KB · Views: 0
  • 20231125_092630.jpg
    20231125_092630.jpg
    792.9 KB · Views: 0
  • 20231125_092652.jpg
    20231125_092652.jpg
    472.3 KB · Views: 0
  • 20231125_092704.jpg
    20231125_092704.jpg
    915.9 KB · Views: 0
Back
Top