Recent content by BOZJOHN

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. BOZJOHN

    nothing seems to match

    Nice car. Seems to me someone along the line restored/cloned it to their liking.
  2. BOZJOHN

    73 Black Q Code Convertible

    Very, very nice!
  3. BOZJOHN

    Door rattle - latch/handle rods?

    Hey Tony, my driver's door rattles only when window is all the way down. Passenger side does not. Found driver side anti-rattle sleeves are no longer there. I have not yet installed these parts, but National Parts Depot sells these. Might install them in the next couple days, I'll let you know.
  4. BOZJOHN

    Improving panel fit and alignment

    I agree 71coop. I've changed my entire driveline: engine, trans, rearend, shocks, brakes. Therefor had jacks in many different locations and not once had a body flex issue. doors opened and closed like it was on the ground. No gap issues, and mine is a vert.
  5. BOZJOHN

    Dash: replacing old lamps with LEDs

    The dash pad comes off pretty easy. Thats how I got my fat hands in there.
  6. BOZJOHN

    Rear Spoiler opinion, Yes or No?

    I agree I'll soon be putting one on mine.
  7. BOZJOHN

    Starter Gremlin

    A loose or misaligned neutral safety switch will basically kill everything and seem like a dead battery. There is a small alignment hole I believe it is .070" you must align the hole in the switch with the hole in the trans, on a 73'. I keep a drill bit in my glovebox.
  8. BOZJOHN

    Refreshing a 351 Cleveland?

    With a 4 speed you might be able to step the cam up a notch. I just wanted a mild daily driver and I think I accomplished that. With my past experiences it's always good to start milder then go up from there. That way you can log your performance in case you need to upgrade in other places.
  9. BOZJOHN

    Engine Mounts Nightmare

    Thank you for the info. I was not aware of that. Actually this is the first time I have ever heard of this being a problem. I have a 73' so I didn't face this issue.
  10. BOZJOHN

    Not really a hit on NPD

    My 73' factory windshield/mirror location is 5-1/2" from bottom of outside trim to center of mount.
  11. BOZJOHN

    Refreshing a 351 Cleveland?

    Just for information purposes I put together a 72' H-code 351 2V stock bore, stock pistons, Edelbrock 60cc 2.05 valve heads, air gap intake, Comp cams extreme energy CL32-242-4 cam: .218/.224 @ 0.050", .513"/ .520" lift, 110 deg. lobe separation. 750 Holley, 2,400 rpm stahl convertor, C-4...
  12. BOZJOHN

    Engine Mounts Nightmare

    Convertible and Mach1 engine mounts are the same. 351C and 302 mounts are the same also. 351M is different beast all together, don't bother with them. I think he was saying someone previously had put a 351M in (dummy) and now he is getting a 351C put in.
  13. BOZJOHN

    Mount for Saginaw PS pump

    I used a factory 302 bracket and extended it slightly to fit in original location.
  14. BOZJOHN

    72 vert finally done

    Thank you for the info.
Back
Top