Don C's latest activity

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • Don C
    Don C replied to the thread Wiring harness oddity..
    That (wire number 469) is the power feed for the seat belt warning, runs from a purple-white wire (#520) at connector 27 to the...
  • Don C
    Don C reacted to Hemikiller's post in the thread Rear Power Window socket wiring with Like Like.
    The motors are not grounded to the car, not electrically anyway. The motors are controlled by switching polarity. In one direction, one...
  • Don C
    Don C replied to the thread 1972 FMX shift linkage grommet.
    That's the correct one. Ford used them for many years on many different transmission shifters. The OEM ones ranged from brown to black.
  • Don C
    Don C replied to the thread Disc brake conversion options.
    The Explorer swap seems to be a good way to go, some of the forum members have done it. The best posting/tutorial about it appears to no...
  • Don C
    https://www.npdlink.com/product/radio-side-speaker-wire-repair-pigtail/199226?backurl=search/products?search_terms=pigtail&top_parent=200...
  • Don C
    My guess is that the first timing chain they gave you was for a Windsor, a common mistake at parts counters. Where did you get them, and...
  • Don C
    They are not easy to find. I paid $1,000 for a Q code 4-bolt engine, a couple of years ago, that had been stripped down, had standard...
  • Don C
    Don C replied to the thread 3 Inch Exhaust.
    There's some information on exhaust pipe sizes in post #4 of this thread: https://7173mustangs.com/threads/new-leafs.44427/#post-447338
  • Don C
    Don C replied to the thread High Idle Speed.
    Did you check the idle adjustment on the secondaries? Double check the linkage and return springs, make sure it's not hanging up on...
  • Don C
    Don C replied to the thread 3 Inch Exhaust.
    I agree, back pressure is not needed nor wanted in a performance application. I believe that where this myth started was people reducing...
  • Don C
    Don C replied to the thread 351C to 460 Swap - Opinions.
    There's a spreadsheet in this thread that will let you play with ratios, tire sizes, RPM and speeds...
  • Don C
    Don C reacted to mwallace's post in the thread 351C to 460 Swap - Opinions with Like Like.
    Thanks for the feedback. I really appreciate it. I believe I'm going to just put some 4.11 gears in it before I go any further. With...
  • Don C
    The Ford Master Parts and Accessories Illustration Catalog. They're available from various Mustang vendors along with the text issue of...
  • Don C
    Don C replied to the thread dual exhaust and gas line.
    Not only do gear clamps look cheap, they are dangerous. The rubber creeps out from under the clamps, leaving the clamp loose and...
  • Don C
    Don C replied to the thread Kill switch system? Your thoughts?.
    I agree with others. Too much risk for an electronic device of unknown quality to control the entire electrical system. There are other...
Back
Top