Hemikiller's latest activity

Single wire in the engine bay harness with the white barrel connector shown by the Red arrow.

The white w/black stripe will start in the alternator harness, to a plug below the starter solenoid which connects it to the main engine...

Another option would be to decrease the bore of the master cylinder piston, which will reduce the required pressure, but increase pedal...

In the Mach, I'm running a Champion CC381 3 row radiator, factory shroud, factory non-Ac pulleys, Hayden 2710 clutch and a 69 Cougar...

1973 was the first year of the electric-assisted hot air choke. You should have a white wire with black stripe in the engine harness...

The Pertronix I or II can run on the resistor wire, but it can interfere with the proper tach reading. Best practice is to power the...