Just went through the whole thread Awesome work with excellent attention to the panel lines and gaps-Nothing like a really nice clean baking booth to spray in ! Paint work looks FANTASTIC !! Congrats !!
So I forgot to mention I took a look at my motor today since its probably time to start thinking about getting it ready decide what I'm going to do as far as a power plant-Although it doesn't look it this is the original numbers matching motor I had rebuilt around 1985 ish I think, I only had...
Got the right side all in 2K primer today !! :biggrin: Taking a little break for a day or two regrouping-Than I'm thinking on to seam sealing the entire car inside-outside- bottom-I'll Probably be using Raptor liner as the final finish on the bottom after that painting the engine bay (flat...
Filler work on the vents is finished !!! and the hood is in 2k blocking primer-I sanded the epoxy primer on the passenger door yesterday and will have the fender done in a few hours-Will have those 2 panels in 2k Blocking primer by the end of the day- Next up the underside of the car and seam...
Mission accomplished-I got the vents bonded in to the hood-Quite a little project here-I used S.E.M. multi-panel adhesive, great stuff ! I'll be using their epoxy based 2 component seam sealer for doing all the seam sealing-So after I bonded the vents in I had to actually weld fill a few of the...
Thanks Guys ! Yes been a long time ! I'll do what I can with pics & videos, My work area is really small so a lot of stuff needs to be done outside & I'm at the mercy of the weather, I've got a bunch of parts that have been stripped & prepped ready to epoxy prime but waiting on some...
Ok here we go ! So the last post we had did the rustbullet on the interior of the roof that's finished I also did the install of the Raam mat sound deadner & installed the custom roof braces. To bring you up to speed I was working on doing the body work on the roof & passenger side of...
Well Guess what guys? I'm back :cool: It's been 5 years since I last posted on the site (man time flies) In that time I've finished a few other projects (including my other 1972 Mustang) & unfortunately this car got put to the back burner. I also had to give up the shop I had it in. But...
Heres how to mount a front spoiler Enjoy !:D This is an oem 71-73 frt spoiler..& Those "pre-drilled" holes that the guy used in the grande link...Drain holes so water dosn't sit in the valance not spoiler mounting holes
Guy's,
I thought I would post up some pics & a how to build yourself a garage workshop on the cheap. This is how I did it & it's served me well for over 10 years ! I purchased (at the time it was cover it, now bought out by shelter logic) this 12 x 20 x 8 ROUND style portable garage...
Thought you guys would like to see the stands I made to get the car at a comfortable level for doing the filler work on the lower half of the body..2x4's 16.5" long & deck screws..Now I can sit on a chair instead of laying on the ground..Plus makes it real easy to see...Need to finish the...
Guy's
Here's how to make a super safe set of car ramps on the cheap
6--2x8x8 or 2x10x8
first one on the bottom is 6 feet long.....then each layer or step is 1 foot shorter...use deck screws to screw together..fast cheap & SAFE this is the second set I have made..They work great & you...
Are you still looking for a valance ? I have a N.O.S ford rear valance, If so PM me
Someone along the line put some spray bomb primer on it but you can see where I took it off factory EDP under it