Hi All. I am looking to rebuild my vacuum system on my 1973 with 351 C 2V engine. I know many have removed or blocked off most of this so I'm hoping there are parts sitting around that I can use. Based on the Engine and Emissions Shop manual (using diagram 3-14A). There are a few pieces...
Hello Everyone. Wanted to send out a big thanks for everyone for helping out with this issue. After much investigation and procrastination, the mustang is finally turning over. It required replacement of the battery cables - specifically the negative terminal. There were cracks in the cable...
Hi I’m interested in the column cover. Too bad on the quarter panels. I could use those. Let me know how much and how to arrange things. I’m located in Massachusetts
That could be an option. I sourced carpet, headliner, and material for seats from SMS. Did you get an off the shelf paint or did you mix your own avocado color?
Hello members. I have a 73 mach 1 with an avocado interior. i've been able to source some of the interior parts such as carpet and headliner. Overall, the interior is solid but I desperately need an Avocado dash in good shape. Mine is significantly cracked and would require extensive repair...
Hi I wanted to provide an update on this. I appreciate all the comments and followed the instructions as discussed. I replaced my Motorcraft starter solenoid with an old one I had from Advance Auto. Hooked everything back up and the car started! I noticed it was running rough so i shut it...
Thanks for the suggestion. I was able to spin the fan not sure if that confirms hydraulic lock isn’t the problem. Some added info: when I attach the battery the alternator light goes on when I turn the key to the accessory position. When I try to start it makes 1 or 2 click/knock type sounds...
Hi everyone. Last fall I replaced the intake manifold gasket in my 351 Cleveland. I got the distributor back in and everything worked. The car started differently (but started). When driving one day I heard what sounded like a pop from the engine. After that the car won’t start. When I turn the...
Hi. Sorry to bother this group but I need confirmation on a hole I found in the engine block on my 351 Cleveland out of my 1973 Mach 1. I am replacing the intake manifold gaskets due to leaking and upon inspecting the block, at the front I notice this strange hole. Based on how the metal is...
I got everything installed and the suspension is much better than before. Ride height in the front has increased and the shock sits at the right height in the tower. Overall I believe the cut spring caused the problem! Thanks to all for helping me through the problem. Now I can enjoy driving it...