Recent content by [email protected]

Yeah interested what you found. Not sure how to PM you. TFA

Anyone ever had a harmonic vibration and find a fix for it? I have one that comes in and out at about 2,000 to 2,200 rpm's. I have replaced the vibration damper 2X. I also have tried re-indexing the torque converter 180 then 90 degrees. I have also unhooked all the drive belts-no change. It...

Have you tried a new blower motor resistor, it's up right by the fan motor. Just unplug the connector and plug new one to connector and see if it works right. TFA

Can you post a pic of where the wire goes thru the door, I am installing door speakers in mine that never had them. What do you have for rear speakers?Thanks TFA

Ok, I found my problem, got looking under dash and found a flat 2 plug female connector behind radio with 2 white wires with pink tracers going into one port of connector and a light blue w/red tracer in other port but not plugged into any thing, traced the white w/pink wires and found one that...

I was thinking of doing that but really don't want to cut the OEM harness if I don't have to. I have ordered a wiring diagram for CJ pony to review the complete circuit. Wiring problems are always a pain in the butt. Thanks for your input. TFA

I moved the lever slowly on the new switch before I mounted it and I did not get them to work with the ignition switch on.

So if the wipers/washers and radio work the wire must be open from there to plug at fire wall. Will check that out. Thanks for your help. TFA

Does it feed from the ignition switch?

Back lights not working, checked all fuses=good, replaced NSS, still nothing, if I unhook the 4 wire plug at the firewall and use Power probe to put power to the black wire w/pink tracer they work. Can not figure out where power comes into circuit. Should the black/pink have power with key on...