Recent content by td71mach1

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. td71mach1

    My 351 c reinforcment casting marks....?

    h Here recently i researched some characteristics of my engine block. Apparently these blocks were experiencing cracks in the corners early on, so ford starting casting them with the "Y" and "X" 's in the corners to reinforce and stop these cracking problems. In my limited time researching i...
  2. td71mach1

    Parts For Sale Mini Console FS

    I know this is an old post, but any chance the console is still for sale? Thanks...
  3. td71mach1

    Steering wheels spring

    Thanks Don! Looks like no spring is used.
  4. td71mach1

    Steering wheels spring

    Rebuilding my 71 non tilt steering column. Is there supposed to be a spring under the steering wheel for tension? I've seen pictures that shows a spring below the wheel nut that looks like kind of like a valve spring. Mine does not have one and I thought it might be missing. Thanks...
  5. td71mach1

    Parts Wanted Want a used or broken tilt column rag joint coupler

    Sprint, are you interested in selling this column?
  6. td71mach1

    Tilt wheel

    I am upgrading my 71 mach1 to a tilt wheel and need some info on compatibility. Do any of the cougars steering columns fit.
  7. td71mach1

    Austin Vert's Grille Makeover Project.

    Thank you Greg, very helpful.
  8. td71mach1

    Austin Vert's Grille Makeover Project.

    How do you remove the chrome straps from the grille?
  9. td71mach1

    What's wrong with this picture of my driver door?

    Other than the latch hole are upside down ! Put my new door on a couple months ago, went to install the door latch today and the holes don't align to my latch, should be two on top and one on bottom. Any body else ever see this before? They are Dynacorn doors and came as a set. The passenger...
  10. td71mach1

    Regulator ground wire

    Hemikiller, thanks for clearing that up, that could have been ugly... Midlife, the harness's you just did for me and (and my brother) are great, nice work! Thank you both !
  11. td71mach1

    Regulator ground wire

    Only black, no strip or dots. Bought from NPD. https://www.npdlink.com/product/wire-loom-alternator-feed/102024?backurl=search%2Fproducts%3Fsearch_terms%3D14305-5B%26top_parent%3D200001%26year%3D1971&year=1971 Previous owner cut, and mangled my original and this black lead was cut off. The...
  12. td71mach1

    Regulator ground wire

    Replacing the regulator harness on my 71 and have a question. Is the wire marked in the picture simply a ground wire? I assume it simply mounts where the regulator mounts to the inner fender. My diagram isn't clear and I don't want to fry anything. Thank you...
Back
Top